Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: n00bvaks 4agte monster (well almost)

  1. #1
    Senior Member n00bvak's Avatar
    Join Date
    Dec 2008
    Name
    Novak
    State
    WA
    Location
    SOR
    Country
    Australia
    Posts
    273

    Talking n00bvaks 4agte monster (well almost) ***UPDATE 29/12***

    Hey guys,

    Most of this info was pulled from the old forum.

    The start:
    - Bought a ke70. 1984, sky blue, grandma spec, 4k that doesn't idle
    - had rims (sil offset Watanabe) and 86 sus in ther within an hour of buying it

    The Plan :
    - was gonna go CA18det then stomps86 "convinced" me to go a 4agze, then " may as well turbo it" so there you go
    - suspension wise was gonna be sil conversion up front and trd in the back
    - driveline w-series gbox and f-series diff

    Where I am up to:
    - ze is in and has a nice t25g and china s-steal manni hanging off the side
    - running stock ecu just until I can get it to tuner to install ems stinger.
    - suspension Front [ca hubs, d2 shocks(cheap scd/hnd),tein camber tops], Rear [ TRD blue shocks, trd 6kg springs
    -jap t50, for the moment, trd short shifter
    - diff is a rare s-series 2 way, will prolly sell it before i thrash it though.
    - rims got 2 sets of sportmax
    - hydralic h/brake
    - custom pwr radiator
    - fuel surge tank setup running VL turbo fift and pressure pumps, malpassi fuel reg
    - custom dash sproting a full set of auto guage smoke gauges (just for the rice of it all!)
    - and a lot of custom goodies yet to be finished.

    Things to do:
    - wiring
    - driveline changed to w box/ f diff and custom tailshaft
    - stinger ecu installed
    - paint, black and metallic red

    the start:


    the next day:


    Now:






    Also g4 hydraulic handbrake fitted, this is the best mounting posi, so easy to go from second to handbrake!!!



    oh and here is a taste of what else i've been working on...
    Last edited by n00bvak; 29th December 2008 at 12:27 PM.
    --- All your base are belong to Phil Bradshaw!!! ---
    `
    <<< blog >>> build thread<<<

  2. #2
    Veteran Dom86's Avatar
    Join Date
    Dec 2008
    Name
    Dom
    State
    WA
    Location
    Balga
    Country
    Australia
    Posts
    1,052

    Default

    looking good man.
    When do you think it will hit the track??

  3. #3
    Senior Member n00bvak's Avatar
    Join Date
    Dec 2008
    Name
    Novak
    State
    WA
    Location
    SOR
    Country
    Australia
    Posts
    273

    Default

    I hope its soon Dom. got a fair amount of niggley things to do. My problem is I dont have much time to do it., sux working away.

    Oh well, looks like it wont be done till next year some time. How bout yours???
    --- All your base are belong to Phil Bradshaw!!! ---
    `
    <<< blog >>> build thread<<<

  4. #4
    Veteran Dom86's Avatar
    Join Date
    Dec 2008
    Name
    Dom
    State
    WA
    Location
    Balga
    Country
    Australia
    Posts
    1,052

    Default

    Should be going by March.

    Who owns the yellow hachi in the back ground of one of the pics?
    Last edited by Dom86; 20th December 2008 at 10:36 AM.

  5. #5
    Senior Member n00bvak's Avatar
    Join Date
    Dec 2008
    Name
    Novak
    State
    WA
    Location
    SOR
    Country
    Australia
    Posts
    273

    Default

    thats Stomps (adam) car, it is very sexy and soon to be vmount
    --- All your base are belong to Phil Bradshaw!!! ---
    `
    <<< blog >>> build thread<<<

  6. #6
    Senior Member n00bvak's Avatar
    Join Date
    Dec 2008
    Name
    Novak
    State
    WA
    Location
    SOR
    Country
    Australia
    Posts
    273

    Default

    **** updates *****

    Haven't really done much recently stack with a lot of small issues and getting 1 wrong part that drags everything back, grrrrrr

    Got the boot fuel system sorted out with plenty of help from stomps, looks pretty good now. Running a combo of vl turbo lift and pressure pumps and a serl catch can.

    Also started on the dash, CBF trying to fit everything into the stock dash, so 1 pice of ally and a set of brand spanking autogauge gauges, kill switch and blue buttons it all looks pretty sweet!!!

    surge and pump setup:


    Dash setup (mostly wired, damn I hate wiring!):
    Last edited by n00bvak; 29th December 2008 at 12:25 PM.
    --- All your base are belong to Phil Bradshaw!!! ---
    `
    <<< blog >>> build thread<<<

  7. #7
    Senior Member OMG866's Avatar
    Join Date
    Feb 2009
    Name
    Nick
    State
    NSW
    Location
    Miranda
    Country
    Australia
    Posts
    447

    Default

    wow 2 hand breaks lol

  8. #8
    Senior Member n00bvak's Avatar
    Join Date
    Dec 2008
    Name
    Novak
    State
    WA
    Location
    SOR
    Country
    Australia
    Posts
    273

    Default

    yer 2 handbrakes, one for hektic drifto, the other to stop the car rolling down hills
    --- All your base are belong to Phil Bradshaw!!! ---
    `
    <<< blog >>> build thread<<<

  9. #9
    Senior Member n00bvak's Avatar
    Join Date
    Dec 2008
    Name
    Novak
    State
    WA
    Location
    SOR
    Country
    Australia
    Posts
    273

    Default

    ahhhhhhhhhh, so close to starting the beast but sooo much fiddly shit to finish before we can. ahhhhhh.

    - custom cooler piping to be made/installed (for v-mount)
    - once thats done I can fit the grex oil filter relocator/cooler and piping
    - once thats done i can measure/fit up the turbo oil/waterlines and the fpr
    - and then there is wiring the interior and other crap before we can start it and take it to have aftermarket ecu installed


    now the issues, god dam dump pipe wont fit!!! wanted hectik separate screemer pipe and id wont fit within the chassis rails DAMN,so need to have that fixed
    - wiring is a pain in the ass and cbf
    - lots of body work to do, not that i mind coz it is pretty easy just time consuming.

    ... and the worst thing is that i am 2 weeks down of my 3 weeks annual leave and I have barely touched it!!!!!

    just want it finished, need motivation and it is so much easier to look at the car while drinking beer than actually finishing it.

    ahhhhhhh

    need kind motivational words to get my ass away from watching the 3 2 and a half men series i just got and finish car!

    /rant
    Last edited by n00bvak; 11th April 2009 at 01:21 PM.
    --- All your base are belong to Phil Bradshaw!!! ---
    `
    <<< blog >>> build thread<<<

  10. #10
    Senior Member n00bvak's Avatar
    Join Date
    Dec 2008
    Name
    Novak
    State
    WA
    Location
    SOR
    Country
    Australia
    Posts
    273

    Default

    k, got a few things done now:
    - FPR fitted, just need fuel filter now and I am done with the fuel system
    - got dli fitted with leads
    - slowly piecing the car back together, so it actually looks like a car and the front guards dont fall off all the time!!

    had a couple of cans of rattle gloss black lying around and wnted to check out what it might look like when painted (and see how many dings were in the doors!!!

    doesn't look half bad




    still got plenty to do though so when I get back down to perth, I really have to get on with it!
    Last edited by n00bvak; 26th May 2009 at 06:51 PM.
    --- All your base are belong to Phil Bradshaw!!! ---
    `
    <<< blog >>> build thread<<<

Page 1 of 2 1 2 LastLast

Similar Threads

  1. monster garage!
    By Tim.duncan in forum Offtopic Discussions
    Replies: 18
    Last Post: 13th December 2010, 06:57 PM
  2. Monster Go-kart
    By Jman_KE70 in forum Youtube Chan
    Replies: 6
    Last Post: 13th February 2010, 01:27 PM
  3. P plate monster hilux
    By hachi6 in forum Cars for Sale (Toyota Only)
    Replies: 2
    Last Post: 16th September 2009, 11:11 AM
  4. Import Monster; who's used them?
    By Breaka in forum General Topics (No Technical Questions)
    Replies: 26
    Last Post: 12th July 2009, 08:08 PM
  5. n00bvaks ke70 project
    By n00bvak in forum KE70 / AE71 Owners Forums
    Replies: 33
    Last Post: 17th September 2008, 09:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •