I havr successfully fitted an ae82 power steering setup to a 20v in an ae82 without mods. Theybwere originally 4age big port too.
Hi everyone,
Im putting in a bt20v in my ae86. Ive tried searching and theres not much info out there.
One potential solution is to retain 16v pwrsteer pump, but use a 16v pulley an machine 3mm off from the back. I also don't have A/C, so can't use standard 20v pump as it utilises the A/C belt adjuster.
Question is, how will this affect water pump and alternator pulley?
Do i need to use 16v alt and water pump?
Last edited by 55psi; 11th July 2016 at 10:04 PM.
I havr successfully fitted an ae82 power steering setup to a 20v in an ae82 without mods. Theybwere originally 4age big port too.
Big up's for the North East Massiv'
NSATB - New Skids Around The Block
Does your setup include A/C? The A/C has the pulley adjuster correct?
I dont have A/C and dont want to use it.
This was a while back. Don't have the car anymore. Check out twincam.org that is where the information for the conversion came from.
Big up's for the North East Massiv'
NSATB - New Skids Around The Block