Results 1 to 3 of 3

Thread: Roll Cage Question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member qagzie's Avatar
    Join Date
    Aug 2013
    Name
    Maxwell
    State
    Drift Zone
    Location
    Palm Village
    Country
    Uganda
    Posts
    129

    Default Roll Cage Question

    Hellos,

    Would it be overkill for a 6-point roll cage in a 1uz swap KE70 to weigh 40kg? ...

    How much do your cages weigh? what would you recommended?

    cheers.

  2. #2
    Junior Member
    Join Date
    Nov 2018
    Name
    Joel
    State
    Qld
    Location
    Brisbane
    Country
    Australia
    Posts
    1

    Default

    It's pretty easy to work out how much a cage should weigh by measuring the linear metres of tube, the OD and the wall thickness (can measure with ultrasonic thingy) or ID and working then out the volume of steel. Then multiply the volume by the density of steel. The density of chrome moly is almost exactly the same as mild steel. Add a couple of percent for gussets, tabs, footings and filler wire/rod.

    40kg is in the ball park.

  3. #3
    Senior Member qagzie's Avatar
    Join Date
    Aug 2013
    Name
    Maxwell
    State
    Drift Zone
    Location
    Palm Village
    Country
    Uganda
    Posts
    129

    Default


    Thanks for the reply. I did the math and total weight will be approx 43kg, which is ~94 lbs also equivalent to a 10hp loss or 0.3 seconds off the pace.

    Not so bad I guess.
    Last edited by qagzie; 13th November 2018 at 07:46 PM.

Similar Threads

  1. roll cage
    By talbo in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 17th April 2012, 08:48 PM
  2. AE86 / KE70 (sedan) Roll Cage - 7pt, half or full cage
    By Bomfunkmc in forum Car Parts For Sale
    Replies: 11
    Last Post: 17th April 2012, 12:27 AM
  3. wtb: Roll cage!!!
    By stanzzza in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 12th July 2010, 07:31 PM
  4. Wtb: Roll cage!!!
    By schmykel in forum Cars or Parts Wanted
    Replies: 5
    Last Post: 5th June 2010, 10:28 PM
  5. 1/2 roll cage
    By SSD20V in forum Technical - Questions
    Replies: 5
    Last Post: 27th July 2009, 06:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •