Results 1 to 6 of 6

Thread: 74 ta22

  1. #1
    Senior Member
    Join Date
    Jan 2009
    Name
    Alex
    State
    QLD
    Location
    St Lucia
    Country
    Australia
    Posts
    899

    Default 74 ta22

    1974 TA22 Celica

    The good

    14" mags
    2 1/4" exhaust
    extractors
    3T engine
    bucketish seats possibly from a Supra
    woodgrain steering wheel
    The back seats and door trims have been re-trimmed
    lower stiffer suspension
    New battery
    New slave cylinder
    New piston bearings & gaskets
    New valve stem seals
    New oil filter
    New spark plugs
    New oil
    New fuel filter
    Original black and with plates
    Lots of spares including Webber, gearbox, 18RC motor, etc.

    The bad
    Some fairly bad rust spots
    Hasn't been driven regularly for about 4 years
    cracked dash & centre console
    lots of small scratches and stuff on the paint, but no dents or anything
    one front guard needs to be painted
    Engine needs to be bored and new piston rings

    Asking $2300.
    Call 0403241788 My names Alex
    The car is in Maleny on the Sunshine Coast

    Also I'd swap for something 4 cylinder, rwd.
    Note I'm not on the net much at the moment so if you're interested you need to call and talk to me about it.
    Last edited by flamingheads; 20th August 2009 at 10:11 AM.

  2. #2
    Senior Member
    Join Date
    Apr 2009
    Name
    Alistair
    State
    QLD
    Location
    Cleveland
    Country
    Australia
    Posts
    207

    Default

    pics???

  3. #3
    Senior Member
    Join Date
    Jan 2009
    Name
    Alex
    State
    QLD
    Location
    St Lucia
    Country
    Australia
    Posts
    899

    Default

    Ok so I got it started yesterday and it's running ok but the choke just needs to be freed up.
    It will need the piston bearings replaced and possibly new rings. The reason the clutch isn't working is either the slave cylinder or the gearbox. So the price has been dropped to $2500

    I'll also try to get pics up by tomorrow

  4. #4
    Senior Member
    Join Date
    Jan 2009
    Name
    Alex
    State
    QLD
    Location
    St Lucia
    Country
    Australia
    Posts
    899

    Default Pics









    Sorry for the crap picture quality. I didn't realise my cameras lowest picture quality was that low. Anyway here are some pics.
    I'm negotiable on price and if I can sell a few parts the price will go down on it.

  5. #5
    Senior Member
    Join Date
    Jan 2009
    Name
    Alex
    State
    QLD
    Location
    St Lucia
    Country
    Australia
    Posts
    899

    Default Pics

    sorry. double post
    Last edited by flamingheads; 26th July 2009 at 01:26 AM.

  6. #6
    Senior Member
    Join Date
    Jan 2009
    Name
    Alex
    State
    QLD
    Location
    St Lucia
    Country
    Australia
    Posts
    899

    Default

    The car is running now.
    For roadworthy it will need:
    -The block will need to be bored then obviously it will need new rings
    - the universal joint at the from of the tailshaft
    - Rust repaired
    - Two new tires

    That's all the major stuff. There could be more but I haven't had a close look at it.

Similar Threads

  1. LANKY'S '74 mazda F1000 ute
    By lanky101 in forum Other Rides
    Replies: 10
    Last Post: 23rd August 2013, 03:14 AM
  2. Richie's 74 Chevy Cheyenne
    By hilux05 in forum Other Rides
    Replies: 2
    Last Post: 29th August 2012, 08:02 AM
  3. 240rwkw Vy Ss Commodore, 74,000km
    By jet111 in forum Cars for Sale (Not Toyotas)
    Replies: 7
    Last Post: 22nd December 2009, 09:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •