Results 1 to 4 of 4

Thread: 4agze ecu pin outs

  1. #1
    Senior Member ae86ln's Avatar
    Join Date
    Dec 2008
    Name
    Lew
    State
    NSW
    Location
    Bolton Point
    Country
    Australia
    Posts
    180

    Default 4agze ecu pin outs

    i found this for the ecu pin outs but it doesnt say which are the earth does any one know?

    heres the link


    thanks lew

  2. #2
    Veteran Skylar's Avatar
    Join Date
    Mar 2009
    Name
    Ken
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    1,370

    Default

    brown wires.

    earth out on inlet manifold.

  3. #3
    Senior Member ae86ln's Avatar
    Join Date
    Dec 2008
    Name
    Lew
    State
    NSW
    Location
    Bolton Point
    Country
    Australia
    Posts
    180

    Default

    cool thanks where abouts on the manifold.

    keep them coming if there any more
    Last edited by ae86ln; 30th July 2009 at 03:47 PM.

  4. #4
    Veteran Skylar's Avatar
    Join Date
    Mar 2009
    Name
    Ken
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    1,370

    Default

    There's four wires going to one lug with a 6mm hole in it held down by one little bolt with a 10mm head. It's not hard to find.

    Well, that's how it is on a NA big port, doubt it changed for GZE.

Similar Threads

  1. 4age 20v ST- Microtech ecu - wiring / plug pin outs
    By Twisty92 in forum Technical - Questions
    Replies: 13
    Last Post: 23rd October 2015, 08:16 AM
  2. ecu pin outs
    By cmesld in forum Technical - Questions
    Replies: 8
    Last Post: 18th April 2007, 10:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •