Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: 3sge beams race motor

  1. #1
    Senior Member
    Join Date
    Dec 2008
    Name
    Glenn
    State
    VIC
    Location
    North Ringwood
    Country
    Australia
    Posts
    559

    Default 3sge beams race motor

    this is what you can get with a lot of work ,with 13.5 to 1 longer rods lightened crank haed work with bigger valves 50mm quad throttles 2 stage injection and a good set of headers the dyno graph is in drift pigs thread but you get the idea
    std beams fwd 110 kws altezza manual 120 kws and mine with a lot of work 189 kws

  2. #2
    Bad Email Address
    Join Date
    Mar 2009
    Posts
    77

    Default

    Are you running the standard Beams crank.

  3. #3
    Senior Member
    Join Date
    Dec 2008
    Name
    Glenn
    State
    VIC
    Location
    North Ringwood
    Country
    Australia
    Posts
    559

    Default

    yes std crank will rev to 9400 ok on down shifts but i wouldnt rev it over 9000 rpm on power shifts and i take 2.5 kilos off the crank to make it spin up easier

  4. #4
    Bad Email Address
    Join Date
    Mar 2009
    Posts
    77

    Default

    im currently updating to 50mm throttle bodies. did get good gains going from the blacktop quads.
    Hope you dont mind me asking these questions

  5. #5
    Senior Member
    Join Date
    Dec 2008
    Name
    Glenn
    State
    VIC
    Location
    North Ringwood
    Country
    Australia
    Posts
    559

    Default

    are you using me quad set up or some 1 elses as i make inlets to suit 20v throttles also 2 stage as well which bolts onto to my quad throttles

  6. #6
    Senior Member
    Join Date
    Dec 2008
    Name
    Glenn
    State
    VIC
    Location
    North Ringwood
    Country
    Australia
    Posts
    559

    Default

    black top quads are 45mm my quads are 48mm and 50mm butter flies

  7. #7
    Senior Member
    Join Date
    Dec 2008
    Name
    Glenn
    State
    VIC
    Location
    North Ringwood
    Country
    Australia
    Posts
    559

    Default

    also it does 1,26.1 at sandown and 1.51 at the island and 1.38 at winton and last time at calder years ago was down to 1.07.88
    hoping to get down to 1.25 at sandown and 1.49 for the island and 1.36 for winton

  8. #8
    Bad Email Address
    Join Date
    Mar 2009
    Posts
    77

    Default

    No was using my own custom manifold i made with blacktop quads but ive ditched that and now setting up Quad 50mm with autronic comp for engine dyno.
    I dont do any circuit racing but i dont really need to to see that your car runs super fast.
    Very impressive and your dyno numbers are truely amazing.

  9. #9
    Senior Member
    Join Date
    Dec 2008
    Name
    Glenn
    State
    VIC
    Location
    North Ringwood
    Country
    Australia
    Posts
    559

    Default

    i still use some vvti as well on the race motor ,you need top see if the autronic can do cam control

  10. #10
    Senior Member
    Join Date
    Dec 2008
    Name
    Glenn
    State
    VIC
    Location
    North Ringwood
    Country
    Australia
    Posts
    559

    Default

    i still use some vvti as well on the race motor ,you need top see if the autronic can do cam control

Page 1 of 2 1 2 LastLast

Similar Threads

  1. 4 into 1 race pipes for 3sge beams
    By Celica RA45 in forum Car Parts For Sale
    Replies: 0
    Last Post: 26th January 2011, 01:16 PM
  2. race 3sge beams at sandown with shit brakes
    By Celica RA45 in forum Youtube Chan
    Replies: 7
    Last Post: 16th May 2010, 05:25 PM
  3. 3SGE BEAMS Motor
    By Konakid in forum Car Parts For Sale
    Replies: 17
    Last Post: 10th February 2010, 02:09 PM
  4. 3sge BEAMS race extractors
    By Celica RA45 in forum Car Parts For Sale
    Replies: 0
    Last Post: 2nd February 2010, 03:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •