yep make your own mounts with flat pieces of metal off the chassis rail for the front. and drill holes in the corner and bolt it into the guard. if it still doesnt fit properly. put some tape on the car and fibreglass up to it
this things an absolute bastard to fit to the car.
does anyone have anytips apart from take it to a panel shop for mounting this
IE differnt mounts or anything else to make her line up and bolt to the car ?
yep make your own mounts with flat pieces of metal off the chassis rail for the front. and drill holes in the corner and bolt it into the guard. if it still doesnt fit properly. put some tape on the car and fibreglass up to it
cable ties drill holes onto your qtr panels to accomodate
make custom mounts with sheet metal i guess..
Don't use cable ties lol.. Drill a hole up into the guard lip and put a bolt through there with some washers.
i dont have a guard lip...it's part of the actual guard now lol.
yeah man what they said, sheet metal, zip ties, whatever it takes.
get ae82 front bar mounts and bash them to fit, works for me
cable tie front 2 holes on the bar to ur grill if u have one, then bolt cable the sides, then use wire to hold the bottom....lol....has plenty of free play but looks decent when standing still =]
dose
yeah till you hit the ripple strip and smash the hell outa your bar and have to buy a new one. Then you will zip tie that one and it will pop off and remain relativley unscathed for track days to come.
RIP Carly - a smile to light the world.
06/07/2011