The Wheel Fitment Thread

[stalker]

Do you know what center disk those 01's are? A-Disk or O-Disk?

Cheers

[Kid Karola]

Computer says front's A, Rear's O

[stalker]

I couldnt see the -13 on either chart lol

[Kid Karola]

Assumed it was -12 (it's only 1mm difference, as rims are usually sized to 1/2" 12.5mm may round up or down)

[stalker]

Ahh true? good to know cheers!
There seems to be so many differences in rims around the world that ive looked at online, that I never know if the charts on the website is correct sometimes lol

[Leafy]

Hey Guys,

Just wondering how a 15 x 8j -0 will fit on the front with xt130 arms
and a 15 x 9j -13 on the rear

Too much poke for the street without flairing the guards? I want to kinda keep it the guards stockish, rolled lip of course.

Also it's on an 86

Cheers

Chris

[Konakid]

The 8 0 will sit perfect flush with the guard with a bit of camber maybe -1 or 2 degrees

The rear will sit about 20mm out of the stock guard, would need a small flare.

All with 195/50 tyres.

If you can just go 15x8.5 -6 on the rear (or all round!) with 195/50 guards will still need a small pull out maybe 10mm on the rear

[Leafy]

Cheers mate!

Everything I needed to know.

[lolwat]

good size tyre for 14x8, 14x7.5

[Jacobxxx]

185/55.