Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22

Thread: AE86 stuff. LSD centre, NC-RCAs, pistons.

  1. #1
    Member dodgybrooks's Avatar
    Join Date
    Dec 2008
    Name
    Stephen
    State
    QLD
    Location
    Townsville
    Country
    Australia
    Posts
    35

    Default 4AGE, 4AGZE, SR20, RB25 engines and other assorted bits & pieces

    UPDATED WITH ENGINES AND SHIT!! READ ON! New stuff in red

    G'day, I've recently returned from living in Japan for five years and have brought back with me a few goodies, some of which are for sale. All prices are negotiable! I'm really keen to get rid of everything asap so if you are interested in something then make me an offer!! Located in Mt Gambier, SA. Willing to post items at buyers expense. I head to Adelaide and Melbourne every now and then so I can organise free freight if you don't want things urgently. PM or call on 0435 281 536


    I've got three sets of negative camber RCAs, two sets are 30mm and made from aluminum, and one set is 25mm and heavy (steel methinks). I don't have any of the bolts. $40 a set. All sold.
    One Toyota 2-way LSD centre to suit sic skids and zenki shafts, $400. Sold

    Shiny new Toyota oversized pistons and rings. Can only be used on 4AGE engines out of AE86, tops will collide with valves in AE92 4AGEs. Oversize me. $800


    Listen to your favourite Eurobeat tracks with these fully pro logic, hi fidelity, low impedance, 1000 amp, shit hot stock JDM front speakers. A must for any fully sik install. 3-1/2". $999


    Momo Commando wheel & (I think!!)Mitsubishi Evo boss. Mint, could be mistaken for brand new. $300


    4AGE from a JDM AE86. Comes with loom, ECU, RWD exhaust manifold, flywheel and clutch, engine mounts, basically everything in the pictures plus the manifold. Will consider parting the major bits if I have buyers for everything. Km's unknown. $700 SOLD PENDING PAYMENT


    4AGZE out of a AE92. It's still sitting on the front member, so it includes the 5 speed manual box, struts, hubs, brakes, rack etc and the ECU. The loom got chopped at the firewall unfortunately, and the intercooler has been squashed a bit by the seat belts when we were moving it about. Km's unknown. $1000 SOLD


    Ducktail wing. All scratched up ready for a respray. $120 SOLD PENDING PAYMENT


    SR20 red top, suit rebuild. Loom included, water pump ok, one of the coilpacks is stuffed, cas is broken, oil pump is stuffed, sump has been battered (will supply brand new oil scavenger), turbo OK. $1,000 Now $600


    SR20 pot luck camshafts $100
    Brand new, I’ve been told they are aftermarket but I have no idea of specs.


    RB25DET engine with ECU, clutch, possibly blown turbo, starter motor, manifolds and a bastardized loom. $1,600 Now $1,000 SOLD


    ST185 Celica GT-4 bits and pieces:

    3S-GT PowerFC and hand controller $900
    Hand controller has some dead pixels, have a look at the pictures.


    3S-GT ECU $200


    Instrument cluster $100


    Front fenders L&R $100
    One small dent, surface rust on lip, plenty of scratches, need a respray. Stickers are free!


    Rear bumper $200

    Rear hatch $200
    Plastic rear quarter wing extension pieces are broken but are all there, should be repairable.

    Doors $200

    Front bumper and lip (big hole chopped out for FMIC) $100

    Complete pop up headlight units. $200
    One motor is AWOL


    Various:

    GReddy Rebic II $150
    Auxiliary injector controller, complete unit, all you need is the injectors.


    GReddy Rebic III $200
    Auxiliary injector controller, complete unit, all you need is the injectors.


    Toyota 90 series Mark II Vertex side and rear skirts $250


    RB20 transmission $500 now $250
    Last edited by dodgybrooks; 14th March 2009 at 01:37 PM. Reason: Updating sold items and adding new stuff

  2. #2
    Junior Member
    Join Date
    Dec 2008
    Name
    Craig
    State
    NSW
    Location
    Penrith
    Country
    Australia
    Posts
    9

    Default

    What size be the pistons? (how much overbore?)

  3. #3
    Senior Member
    Join Date
    Dec 2008
    Name
    Dim
    State
    NSW
    Location
    Menai
    Country
    Australia
    Posts
    887

    Default

    So that LSD fits T-Series, not S-series yes?

    Or did zenki JDM AE86 have S-series Diff.

  4. #4
    Veteran johl's Avatar
    Join Date
    Dec 2008
    Name
    Johl
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    2,812

    Default

    correct will fit t series

    EDIT: im not the one selling this stuff so please dont pm me. was just putting some info out there
    Last edited by johl; 11th January 2009 at 09:33 PM.
    stroked 2L ca18-ae86 in the build...eta xmas 2012?

  5. #5
    Member dodgybrooks's Avatar
    Join Date
    Dec 2008
    Name
    Stephen
    State
    QLD
    Location
    Townsville
    Country
    Australia
    Posts
    35

    Default

    0.5mm

  6. #6
    Bad Email Address
    Join Date
    Dec 2008
    Posts
    0

    Default Lsd

    I'm interested in the LSD.
    What sort of condition is it in?
    Do you know how much work it's done?

    Thanks

  7. #7
    Veteran shift_rook's Avatar
    Join Date
    Dec 2008
    Name
    Chris
    State
    VIC
    Location
    SE Burbs
    Country
    Australia
    Posts
    4,719

    Default

    yeah also very intersested in the lsd if it'll fit my series 1 t-18 and you'll post

  8. #8
    Member dodgybrooks's Avatar
    Join Date
    Dec 2008
    Name
    Stephen
    State
    QLD
    Location
    Townsville
    Country
    Australia
    Posts
    35

    Default

    Sorry, I've never seen it in a car and don't have Zenki shafts or a diff to stick it in to test it so I don't know what kind of condition it is in nor how many km's it's done. What I do know is that you can get rebuild kits for them!

  9. #9
    Banned
    Join Date
    Dec 2008
    Name
    Mason
    State
    SA
    Location
    Salisbury East
    Country
    Australia
    Posts
    112

    Default

    Hey mate
    What sort of pistons are they, Hitop (dome) & forged?
    Have you got better side view pics of pistons?
    What compression ratio?
    Thanks

  10. #10
    Member dodgybrooks's Avatar
    Join Date
    Dec 2008
    Name
    Stephen
    State
    QLD
    Location
    Townsville
    Country
    Australia
    Posts
    35

    Default

    Sorry about the late reply. They are cast and I think they are standard compression. Here are some more pics:

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Replies: 0
    Last Post: 27th November 2012, 11:05 AM
  2. Qld, traction brackets , RcAs, work rims, other stuff.
    By daltrim in forum Car Parts For Sale
    Replies: 6
    Last Post: 16th July 2011, 12:36 PM
  3. WTB: NC-RCAs
    By blinded in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 30th July 2009, 05:52 PM
  4. ae86 Stock T series Non LSD Centre - Back up for sale
    By Patric in forum Car Parts For Sale
    Replies: 7
    Last Post: 30th March 2007, 01:32 PM
  5. WTB: T3 Roll Centre Adjusters (RCAs) normal camber
    By RoadSailing in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 12th March 2007, 05:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •