PDA

View Full Version : ca18det Panda Ae86 Sprinter Cheap



1sik20valve
31st October 2009, 04:14 AM
hey peoples , the worst day i had 2day .
opened the letter in the mail and realised that i will be loosing my license in 10days for 6months

ive been plannin to turn this thing in to a tuff street car and the ocassional track car . all sound deadening tar has been removed , interior has been sand blasted and sprayed with satin black for a nice clean finish . all aircon has been removed and un-necceassry items also .
but i can't have this thing sitting around for 6months doing nothing so i have to sell my baby project car .

the car is a toyota sprinter adm 1986 model which was owned by 50year old man since new .
the car has the following :
*full repray panda in 2pak color with clear , $ 3500 which was just done 3days ago , still havnt even fitted the rear window moulds on yet .
*absolutly no rust on body , body is straight
*ssr reverse rims with massive dish 15x8 with a negative 4 offset if i remember correctly
*guards have been professionaly rolled and flared
*front guards are plastic and is widebodied.
*adjustable penhard rod
*jdm doors
*187xxx kms on body
* trd 8kg springs with kyb shocks .
* jdm rear end with a full spool diff which set me back 1200 bux
* the motor in it has just been removed , it was the 4ac motor .
the car comes with all complete interior seats , plastics etc etc .
*tinted rear taillights
*jdm side skirts
*rego till november 28
heres the sweet side to the deal , recently purchased for $2100 and have receit to prove was a complete ca18det front cut , which includes engine 92xxx kms gearbox , ecu and loom , pretty much everything u need for the complete conversion .
thats what my plan was , to throw a ca18det in there and have around 160rwkws .
i will be selling the complete car with the motor package for $6500 FIRM .

i will add other information ive forgetten and gladly answer any questions about my baby .
pics can be found at http://www.rollaclub.com/board/index.php?showtopic=35246 since the paintjob is only a few days old , i still havnt taken any pics of her during the day .
but will asap
thanks for your time peoples

1sik20valve
31st October 2009, 04:15 AM
[off the market

callum1
31st October 2009, 09:13 AM
willing to separate anything?

1sik20valve
31st October 2009, 12:30 PM
nar mate sorry
comes complete , im really cut up and dont want to remove parts from her

shift_rook
31st October 2009, 12:44 PM
my 86 has been in the garage for 6 months, i still won't get my license for another 12, just spend more money on it and finish it

1sik20valve
31st October 2009, 01:01 PM
im really goin to find it hard just lookin at it completly sprayed and lookin sexy .
and also the car isnt located in my house , cause my house hasnt got a garage , and theres no way im leaving her out in the rain and sunshine .
so im parking it at a friends garage now , but i cant leave it there for 6months

hachi_dk
31st October 2009, 01:53 PM
hey mate.
wheres this located?

1sik20valve
31st October 2009, 03:02 PM
sorry guys and gals
cars located in sydney
if any p platers would like the car without the half cut , that can be arranged also .

Jaques
31st October 2009, 03:38 PM
hey mate, nice looking machine you have here. im pretty sure i walked past when you guys were taking all the stuff out down by the river.
How much would you be looking for without the halfcut? do you still have the 4ac? I take it you are around the earlwood area right?

1sik20valve
1st November 2009, 04:01 AM
hey mate, nice looking machine you have here. im pretty sure i walked past when you guys were taking all the stuff out down by the river.
How much would you be looking for without the halfcut? do you still have the 4ac? I take it you are around the earlwood area right?
yea man im in the earlwood area , and u would of walked past us when we were stripping her .
the 4ac is out , the motor has had it but .
everybody is tellin me not to sell it , im having 2nd thoughts , so the cars sorta on hold.

GEMTA22
1st November 2009, 09:39 AM
Dont sell it, firstly its too cheap, put lots of effort into it.
Secondly you can apply for a good behaviour bond, so you can still drive.

Thirdly, you'll be suprised how long the conversion will take and by the time your done 6 months will be up gauranteed.

1sik20valve
1st November 2009, 02:06 PM
Dont sell it, firstly its too cheap, put lots of effort into it.
Secondly you can apply for a good behaviour bond, so you can still drive.

Thirdly, you'll be suprised how long the conversion will take and by the time your done 6 months will be up gauranteed.

appreciate it man , every1 is saying not 2 get rid of it also . my bro wants to put a 16v straight in with him and his friends and drive it for 6months while im suspened and if i cant get that good behaviour bond
im confused , i just hate lookin at her sitting there

1sik20valve
4th November 2009, 02:37 PM
sorry 4 the inconvience peoples , but i didnt have the heart to sell her just yet .
got big plans for her now .
sorry again

OMG866
5th November 2009, 10:02 PM
fuck yea man. good on you. i made the mistake of getting rid of my hachi and i regret it every day. now im stuck with a shit pile 71. owell

GL with it look forward to see the ca go in. You will need custom engine mounts and gearbox mounts. you can get them from Kaizen garage. you will also need to upgrade your diff and get a custom 1 piece tailshaft made up to suit. im in the process of getting my ca into my car aswell

GL

DRFTR86
6th November 2009, 11:25 AM
i have a ca in my 86, its a fkn animal, but im running 206rwkw, ca18det ftw, best of luck with the build, pm me if you need any advice

jfallen
14th November 2009, 06:36 PM
if the wheels need a home, I've got one for them ;)

Cheers
Jordan

Travis
15th November 2009, 05:14 PM
Will you seprate engine from the sale?
cheers