svenny
24th November 2009, 10:22 PM
hey guys need cash to pay off debts. so this has to go
im pretty much asking what i need to pay off my bills. so i wont go any lower
1983 AE71 manual
Red with blue pearl
flat front
T-18 front bumper
4ac with 20v dizzy and razorback ecu
steam pipe 2.25 exhaust with resonator and a little 3" cannon
19 (think) row oil cooler with relocator
front coilovers with camber tops
unsure of rear shocks, but cut rear springs.
bride drivers seat on a bride rail
jap steering wheel
200mm dildo knob
set of 4 calibre gauges
custom dash
piviot tacho
removed rear seats and modified rear section so its blocked off from the boot
bosch 044 fuel pump
1x set SSR meshies 14x7 -13 and 14x6.5 0
1x set Enki crossfevers 14x7 +8
Also comes with a silvertop 20v converted to RWD pulled apart for rebuild
crank has been measured and is within std spec so just needs std main and bigends and std rings requires valve stem seals
come with TRD .8mm metal headgasket
loom for razorback
pretty much everything to put the 20v in a ke and get it running just need to rebuild the motor as it had leaky valve stem seals.
Price $4000
pm for anymore info
pics:
im pretty much asking what i need to pay off my bills. so i wont go any lower
1983 AE71 manual
Red with blue pearl
flat front
T-18 front bumper
4ac with 20v dizzy and razorback ecu
steam pipe 2.25 exhaust with resonator and a little 3" cannon
19 (think) row oil cooler with relocator
front coilovers with camber tops
unsure of rear shocks, but cut rear springs.
bride drivers seat on a bride rail
jap steering wheel
200mm dildo knob
set of 4 calibre gauges
custom dash
piviot tacho
removed rear seats and modified rear section so its blocked off from the boot
bosch 044 fuel pump
1x set SSR meshies 14x7 -13 and 14x6.5 0
1x set Enki crossfevers 14x7 +8
Also comes with a silvertop 20v converted to RWD pulled apart for rebuild
crank has been measured and is within std spec so just needs std main and bigends and std rings requires valve stem seals
come with TRD .8mm metal headgasket
loom for razorback
pretty much everything to put the 20v in a ke and get it running just need to rebuild the motor as it had leaky valve stem seals.
Price $4000
pm for anymore info
pics: