PDA

View Full Version : JDM ae86 left kick panel wiring.


munki
30th November 2009, 05:38 PM
Hi guys

I am in the process of wiring up my adaptronic, where a microtech once was. The factory loom is relatively untouched as whoever wired up the microtech ran new fuses/relays and feeds from batt +. However one plug has been butchered and sealed off with many wires unconnected. I cant use the wiring diagrams about as the 1983 diagrams differ from my 1986 model.

There are seven wires

Y/G - Water temp sensor
Y/B - Oil Press sensor
R/B -
R/L(blue) -
B -
B/O large gauge - power to EFI components? (guess)
B/w Large gauge - Ground to EFI components/ground to chasis? (guess)

If anyone could enlighten me with some info that would be a big help, otherwise i will break out my multimeter and spend forever hunting around.

Will put pics up of plug in a second.

http://img16.imageshack.us/img16/8981/img0427ju.th.jpg (http://img16.imageshack.us/i/img0427ju.jpg/) http://img37.imageshack.us/img37/8974/img0426bw.th.jpg (http://img37.imageshack.us/i/img0426bw.jpg/) http://img37.imageshack.us/img37/img0426bw.jpg/1/w800.png (http://g.imageshack.us/img37/img0426bw.jpg/1/) http://img16.imageshack.us/img16/2269/img0425xk.th.jpg (http://img16.imageshack.us/i/img0425xk.jpg/)

Cheers

Daniel.
sundee
30th November 2009, 07:30 PM
manuals are in the tech section under "manuals"
DAMO46
30th November 2009, 07:56 PM
im also wiring up an adaptronic im in all sorts
Nikkojoe
30th November 2009, 09:24 PM
Ok

Y/G - Water temp sensor
Y/B - Oil Press sensor
R/B - Reverse Light switch
R/L(blue) - Reverse Light switch
B - If its got brown dots, tacho
B/O large gauge - Ignition power for coil, etc (IGN)
B/w Large gauge - Start signal (STA)

Ground wires are usually brown (ecu) or W/B (body)
munki
30th November 2009, 11:20 PM
legend! cheers mate

I traced the black to tacho, and the others would explain why i cant find my reverse switch wires.
slide86
30th November 2009, 11:48 PM
Ok

Y/G - Water temp sensor
Y/B - Oil Press sensor
R/B - Reverse Light switch
R/L(blue) - Reverse Light switch
B - If its got brown dots, tacho
B/O large gauge - Ignition power for coil, etc (IGN)
B/w Large gauge - Start signal (STA)

Ground wires are usually brown (ecu) or W/B (body)

hero of the year.....:))
Golberg
1st December 2009, 05:51 PM
hero of the year.....:))

Seconded

And if you want to find another of those plugs, look at VT commodore rear door loom plug. (Yes is know is sounds crazy, but I searched through all the Toyotas in the wrecking yard where I work and couldn't find one the same, I just happened to lifting a VT rear door and saw one which I'm almost 100% is exactly the same.)