NickAE86
1st December 2009, 06:17 PM
Hey guys
its time to get rid of all the parts i've collected over the years. All parts located in southside brisbane. Pickup preferred but will post all but the bulkiest items at buyers expense
sorry for the picture quality...camera phone is all i have at the moment
1- Haltech E11 v2 [ECU, Manual & Halwin CD Only....NO LOOM] Purchased off Chris O'Shannesy a few years ago but never fitted$450 SOLD
a bit of info on the ecu can be found here http://www.haltech.com.au/index.php?option=com_content&view=article&id=22%3Ae11v2&catid=8%3Asite&Itemid=1
3- Quaife quick rack. Brand new, never fitted $300
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00129.jpg SOLD
7- 4ag sump with oil return. Good condition $40
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00116.jpg SOLD
8- Nardi steering wheel 330mm deep corn 52mm offset. Brand new never fitted. Will throw in a quick release boss also $280 SOLD
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00132.jpg
9- Twincam16 steering wheel. Good condition
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00123.jpg $20 SOLD
10- T3 16V 4AG water pump pulley. Brand new, never fitted.
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00135.jpg $50 SOLD
12- T3 Traction brackets. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00128.jpg $100 SOLD
13- T3 Cambertops. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00127.jpg $120 SOLD
14- Cusco tension rod bar. Brand new, never fitted.
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00126.jpg $60 SOLD
15- Cusco brake master cylinder stopper. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00125.jpg $80 SOLD
2- Brake upgrade consisting of RA60 Hubs, z31 274mm discs, RX7 Calipers, EBC Greenstuff pads, Porsche 944 short stroke shocks (koni yellow, externally adjustable), 225lb/in 2.5" ID coilover springs 200mm free height. Shocks have been short stroked by Ken Graham at Accurate Suspension. Under 1000km travelled on this setup. Includes tie rods, lca's and spare hubs...see pic $500
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00114.jpg
3- Bare ae92 gze motor with spun big end $80
4- 10x 7mge Injectors. Good condition $15 each
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00130.jpg
5- 16v fwd inlet manifold & tps. Good condition $40
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00121.jpg
6- 16v RWD inlet manifold. Good condition$100
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00119.jpg
11- T3 rear strut brace with tri-bar. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00131.jpg $120
16- OEM tie rods. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00124.jpg $50
17- 4agze cam covers. Fair condition...no scratches. A good polish will do the trick $40
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00115.jpg
18- IHI RHB52 Subaru Legacy Turbo. Bought from Craigzee from twincam forums a few years back but never fitted. Rebuilt before purchase. No play apparent $60
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00122.jpg
19- 2 15x7 Work Equip copies with Nankang 205/50/15. Unsure of offset...fit ae86 front & rear no probs$100
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00139.jpg
20- 2 15x7 Auscar style rims with Falken Azenis ST115 195/50/15. Unsure of offset. Fit ae86 rear no probs...spacers req for front (included) $100
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00138.jpg
pm me for contact details
cheers
Nick
its time to get rid of all the parts i've collected over the years. All parts located in southside brisbane. Pickup preferred but will post all but the bulkiest items at buyers expense
sorry for the picture quality...camera phone is all i have at the moment
1- Haltech E11 v2 [ECU, Manual & Halwin CD Only....NO LOOM] Purchased off Chris O'Shannesy a few years ago but never fitted$450 SOLD
a bit of info on the ecu can be found here http://www.haltech.com.au/index.php?option=com_content&view=article&id=22%3Ae11v2&catid=8%3Asite&Itemid=1
3- Quaife quick rack. Brand new, never fitted $300
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00129.jpg SOLD
7- 4ag sump with oil return. Good condition $40
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00116.jpg SOLD
8- Nardi steering wheel 330mm deep corn 52mm offset. Brand new never fitted. Will throw in a quick release boss also $280 SOLD
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00132.jpg
9- Twincam16 steering wheel. Good condition
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00123.jpg $20 SOLD
10- T3 16V 4AG water pump pulley. Brand new, never fitted.
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00135.jpg $50 SOLD
12- T3 Traction brackets. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00128.jpg $100 SOLD
13- T3 Cambertops. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00127.jpg $120 SOLD
14- Cusco tension rod bar. Brand new, never fitted.
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00126.jpg $60 SOLD
15- Cusco brake master cylinder stopper. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00125.jpg $80 SOLD
2- Brake upgrade consisting of RA60 Hubs, z31 274mm discs, RX7 Calipers, EBC Greenstuff pads, Porsche 944 short stroke shocks (koni yellow, externally adjustable), 225lb/in 2.5" ID coilover springs 200mm free height. Shocks have been short stroked by Ken Graham at Accurate Suspension. Under 1000km travelled on this setup. Includes tie rods, lca's and spare hubs...see pic $500
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00114.jpg
3- Bare ae92 gze motor with spun big end $80
4- 10x 7mge Injectors. Good condition $15 each
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00130.jpg
5- 16v fwd inlet manifold & tps. Good condition $40
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00121.jpg
6- 16v RWD inlet manifold. Good condition$100
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00119.jpg
11- T3 rear strut brace with tri-bar. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00131.jpg $120
16- OEM tie rods. Brand new, never fitted
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00124.jpg $50
17- 4agze cam covers. Fair condition...no scratches. A good polish will do the trick $40
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00115.jpg
18- IHI RHB52 Subaru Legacy Turbo. Bought from Craigzee from twincam forums a few years back but never fitted. Rebuilt before purchase. No play apparent $60
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00122.jpg
19- 2 15x7 Work Equip copies with Nankang 205/50/15. Unsure of offset...fit ae86 front & rear no probs$100
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00139.jpg
20- 2 15x7 Auscar style rims with Falken Azenis ST115 195/50/15. Unsure of offset. Fit ae86 rear no probs...spacers req for front (included) $100
http://i4.photobucket.com/albums/y146/sharpens/Parts/DSC00138.jpg
pm me for contact details
cheers
Nick