What clutch is this ????

[AIROCOBRA]

Hi Guys, I am in the process of changing engines ---- Putting one in with a bit more zing.

This is the clutch that was installed on the STD EARLY 4AGE Big port I just pulled out ( 50? KW at wheels )
Gear box is a W58 with a custom bell housing & cross member.
Clutch surface area is 230mm . So I'm assuming it's not a std 4AGE Clutch and fly wheel.
When I purchased the car the owner advise that the person he bought it off in Vic , said that it had a Supra BOX and a heavy duty clutch.

ANY IDEAS WHAT CLUTCH / PRESSURE PLATE THIS IS FROM.

[Nikkojoe]

4agze flywheel with E58 4pk clutch. The clutch plate is not standard item obviously, but the E series fwd boxes have the same splines as W series, hence why it was used...

[AIROCOBRA]

Hi , I though that the 4agze flywheel was 215 mm -- this one is 230mm ?

[Nic19]

no, smallport and 20v is 212mm or 215mm depends who u ask. the gze comes with 225mm and the later models have 230mm.

[Sam-Q]

http://s-86.com/s-flywheels.html