jason89
28th December 2009, 02:43 PM
Long story short, mum wants to get rid of my project at her house and ive lost all motivation and time to finish it. Was a very good learning experience for me but it has to go. Is really 90% complete. But needs work to be coincided for road worthy.
Regretful, but has to go.
Ae71
Everything has been rebuilt/restored.
My main obsession was the engine
4agze
http://www.youtube.com/watch?v=6YrkQ-YdQrQ
-custom intake; SC14 mounted and running, front mount 2 ½ inch thick IC, low volume plumbing, dual 2 3/4 inch throttle body’s, full 2 ½ inch plumbing.
-megasquirted; V3 MSII, with EDIS ignition
Can hear running, needs a tune, comes on boost fast.
Drive Train
-T50
-JDM tail shaft
-T18 rear; new bearings
Front:
-Brakes; slotted vented hilux 4pots
-Suspension; coil over fitted, progressive spring IIRC 6-8kg
-Front sway; very thick
-XT130 struts and control arms
-rebuilt steering rack
Body; isn’t a looker, but all rust was cut out and body resprayed
Misc
-Vl lift pump in tank
-2L surge tank
- new Vl pump
-Battery In Boot
-tank fitted with new style filler for rwc
-new dash with dials (5inch taco, digital speedo, boost, fuel, water, oiltemp, oil pressure)
-More stuff than i can remember
Regretful but has to go :(
$3900 negotiable (ps looking for MR2)
Contact is best via mobile at the moment either txt or call 0430 581 979 or email at Jason.beattie@uqconnect.edu.au but may take some time to reply.
Location: Qld Samford
if you want bigger/more pics contact me
Regretful, but has to go.
Ae71
Everything has been rebuilt/restored.
My main obsession was the engine
4agze
http://www.youtube.com/watch?v=6YrkQ-YdQrQ
-custom intake; SC14 mounted and running, front mount 2 ½ inch thick IC, low volume plumbing, dual 2 3/4 inch throttle body’s, full 2 ½ inch plumbing.
-megasquirted; V3 MSII, with EDIS ignition
Can hear running, needs a tune, comes on boost fast.
Drive Train
-T50
-JDM tail shaft
-T18 rear; new bearings
Front:
-Brakes; slotted vented hilux 4pots
-Suspension; coil over fitted, progressive spring IIRC 6-8kg
-Front sway; very thick
-XT130 struts and control arms
-rebuilt steering rack
Body; isn’t a looker, but all rust was cut out and body resprayed
Misc
-Vl lift pump in tank
-2L surge tank
- new Vl pump
-Battery In Boot
-tank fitted with new style filler for rwc
-new dash with dials (5inch taco, digital speedo, boost, fuel, water, oiltemp, oil pressure)
-More stuff than i can remember
Regretful but has to go :(
$3900 negotiable (ps looking for MR2)
Contact is best via mobile at the moment either txt or call 0430 581 979 or email at Jason.beattie@uqconnect.edu.au but may take some time to reply.
Location: Qld Samford
if you want bigger/more pics contact me