View Full Version : 20v silver/black top questions.
tc-rolla
12th February 2010, 11:13 PM
hey guys,
quick question, did all the 20v siltop models come with itb's?
also is there any parts from the blacktop that i can bolt up into the silvertop to get a bit more poke.
because from memory ST comp was 10:1 and BT was 11:1? correct me if im wrong..
cheers, Ben.
Sam-Q
12th February 2010, 11:19 PM
yes all had the throttles.
The only thing thats superior on the blacktop for most of us is the head. Sure the throttles are bigger but you don't need it. No power to be had by running them over the ST ones.
The higher CR is from the pistons, just fit a 0.8mm head gasket and then you will have the same CR.
What trumpets/intake + exhaust + ECU are you running
tc-rolla
13th February 2010, 02:44 AM
cheers sam.
Just wanted to know as im looking at buying a ST.
also, is there ANYWAY i can run open itbs (no air box, trumpets and socsk/filters) on standard computer? even tho its AFM where BT is MAP?
Ben.
biggo
13th February 2010, 07:33 AM
how do you intend to meter the airflow of an open airbox?
sorry but no you cant run open trumpets on a stock ST20v computer, you need an aftermarket ecu for that.
Sam-Q
13th February 2010, 09:00 AM
actually you can if you have a blacktop but that still won't get past the ignition issue. I highly suggest you run an aftermarket ECU and get of the stock pile of crap.
look at the last section of this:
http://s-86.com/s-ecu.html
keep in mind I know crap all about this subject, its just some key points
Powered by vBulletin® Version 4.2.3 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.