VIC: Cut n' Shut steering arms, a few pairs, some suit ke70, some sprinter/corona.

[Sprinter86]

hey guys,

I had a few of these made for me and my mates, but a have a couple of pairs left over,

these arms have been x-rayed and checked for strength, the welds are extremely strong.

They are shorter than powersteering arms, and have less ackerman than standard arms.

They also help with bump steer, as the steering ball joint end of the arm is welded back on underneath the 'leg' of the arm.(lowering rack end/tierod angle)

pics shortly....

after about $180 a pair.
pm me for queries.

i have a few pairs of corona and one pair of corolla arms.

cheers lads!,
nath

THESE WERE INTENDED FOR TRACK USE AND ARE NOT ROAD LEGAL

[Konakid]

How short are the corona ones?

[Adsport]

pics please !


and numbers so i can do some geometry calculations would be appreciated too :)

[keiichi]

xt130 corona?

you a friend of calvins? need to speak with someone about these, but, might have dibs on xt130 eh.

cheers!

[AJPS]

xt130 corona?

you a friend of calvins? need to speak with someone about these, but, might have dibs on xt130 eh.

cheers!

AE86 ones will fit

[Sprinter86]

ok sold 2 pairs a couple left, get in quick for stupid lock!

ill have proper specs on these arms later tonight, but from memory the ackerman is reduced by 5mm, and the length of the entire arm end to end is 188mm, and the roll center is adjusted roughly 15mm (equivalent of having a 15mm RCA's)

pics and proper specifications by tomorrow night guys.

cheers,
nath