bams_keto
3rd March 2010, 01:20 PM
hey guys
I got this built to run in my 180sx while i was on my p's but never really ran it coz i got defected and epa'd so i stripped the car. Was going to put it into my sprinter but I'm almost off my p's and i'm going turbo so no more need for it. I got it fully rebuilt be Donny at street forced at the beginning of last year and cost over $5000 just on getting the engine rebuilt.
Made 109.4kw at the wheels on safe tune and i never got around to a full tune but should hopefully make 115kws.
Prefect for a P plater.
Spec
S14 Sr20de
264/264 12.05 lift BC cams
CP pistons 10:1 CR 86.5mm
Nissan rods preped and resized
ARP rod bolts
Nissan gasket kit 1.2mm Cometic mls headgasket
MD spares head bolts
Nissan water pump
BC valve springs
BC titanium retainers
Vision cam gears
New timing chain kit
Trust Copy Bigger Sump
King bearings
Block machined
Head machined and port and polish
Fully Balanced
Comes with
Jasma 4-2-1 extactors
Full stainless steel 2 1/2 inch zorst from westside mufflers with highflow cat and muffler (hi quailty and sounds very very hot!)
Sr20det Box (around 90,000)
Nismo Engine and Gearbox Mounts
Engine Loom
Power steering pump
Doesn't come with Ecu, flywheel and clutch
$4500
Contact through pm or message on 0424 580 115 and i'll get back to u
located Sutherland Shire area
cheers
stephen
http://img154.imageshack.us/img154/3392/img1613.jpg
http://img34.imageshack.us/img34/2455/img1614w.jpg
I got this built to run in my 180sx while i was on my p's but never really ran it coz i got defected and epa'd so i stripped the car. Was going to put it into my sprinter but I'm almost off my p's and i'm going turbo so no more need for it. I got it fully rebuilt be Donny at street forced at the beginning of last year and cost over $5000 just on getting the engine rebuilt.
Made 109.4kw at the wheels on safe tune and i never got around to a full tune but should hopefully make 115kws.
Prefect for a P plater.
Spec
S14 Sr20de
264/264 12.05 lift BC cams
CP pistons 10:1 CR 86.5mm
Nissan rods preped and resized
ARP rod bolts
Nissan gasket kit 1.2mm Cometic mls headgasket
MD spares head bolts
Nissan water pump
BC valve springs
BC titanium retainers
Vision cam gears
New timing chain kit
Trust Copy Bigger Sump
King bearings
Block machined
Head machined and port and polish
Fully Balanced
Comes with
Jasma 4-2-1 extactors
Full stainless steel 2 1/2 inch zorst from westside mufflers with highflow cat and muffler (hi quailty and sounds very very hot!)
Sr20det Box (around 90,000)
Nismo Engine and Gearbox Mounts
Engine Loom
Power steering pump
Doesn't come with Ecu, flywheel and clutch
$4500
Contact through pm or message on 0424 580 115 and i'll get back to u
located Sutherland Shire area
cheers
stephen
http://img154.imageshack.us/img154/3392/img1613.jpg
http://img34.imageshack.us/img34/2455/img1614w.jpg