5AGE 1.8l stroker bottom end. NEEDS WORK. Cheap

[LordNafe]

Hey guys,
Some of you will have been around long enough to remember this motor and my old car...
It's a 1.8l stroker bottom end. The crank is a custom type, maybe HKS, crank. It's NOT a 7A. The block has been machined to suit the crank, and from memory bored out to 82mm I think the pistons are.
It comes with ae111 black top 20v rods.
The pistons have been damaged due to an on track fuel pump failure. It will come with a set of ca18 pistons that need some machine work done to fit, but the old pistons will be provided as a guide for this.
This engine went very, very well. The car was very quick. It had a basic head with 256/264deg cams and a basic port and polish and made 100rwkw without being tuned. Sounded fantastic, good torque.
Selling very cheap a) Because I'm currently unemployed and need cash b) I know longer have a hachi roku and c) my next hachi roku is likely to be turbo.
With a bit of work this thing will be perfect for someone wanting a genuinely quick N/A car....
Engine located in Brisbane.
$500
0439 754 013
Cheers, Nafe

[PeakingDuck]

What 4AGE block is it?

[LordNafe]

Big port block

[sun_moon]

i think he meant, "is it 3 rib or 7 rib block"

[10000rpm]

Hi Fella...

Will you take $500 posted for the crank, rods and pistons to Tas, 7292...I don't need the block, it is a pia to post also...

Put some pics up of crank or email them to me at scottandpambrown@hotmail.com

Very keen

Regards

Scott

[LordNafe]

Sorry buddy, $500 posted won't be enough. Postage won't be cheap. Plus the engine is not apart at the moment.
Will find a pic of the crank though if you like.

[10000rpm]

Sorry for querying the condition of this............

[LordNafe]

bump....
Bud you weren't querying.... you were making allegations... let's all grow up hey :)

[LordNafe]

bump...

[LordNafe]

Bump :) This is now at my house, so local buyers are welcome to inspect

[PeakingDuck]

Have you clarified what make of "Crank" it is that you have?

[LordNafe]

As said, it is beleived to be HKS, but not sure. Are you interested in the engine?

[LordNafe]

Really need to move this ASAP. REASONABLE offers considered.

[Delazy]

all HKS cranks have "HKS" cast into them...

when i was interested sometime ago, i was fairly confident that the engine was built by rs-yasu...

they are quite well known for building stroked 16v's with ca18 pistons...

[LordNafe]

I'm pretty sure you are right with the RS Yasu man. I can't remember for sure, becuase it was a while ago that I looked into. But I'm pretty sure you're right.

[LordNafe]

still here

[10000rpm]

My offer still stands..

Regards

Scott

[LordNafe]

Thanks mate. I stand to lose too much if I accept $500 posted. This stuff won't be cheap to post. And it's not something that you just find lieing around in someones garage.

[10000rpm]

$600 for the whole lot freighted to Tas??

[LordNafe]

perhaps without the block. Freighting with the block included would cost a bit too much. Probably willing to remove the crank now....

[JDMBenji]

Can you run it off a normal 4age ecu? Or do you need an aftermarket computer?

[LordNafe]

I wouldn't run it on a stock ecu. It's a larger capacity and higher compression, so needs more fuel than a stock ecu would deliver. it will obviously start and run on a stock ecu, but I wouldn't give it any stick with one.

[gumbie]

Lol, i thought you would be all over this ben :)