4age Oil filter Mount

[keimeier]

what am i missing? if i get an oil union bolt will the filter seal its self around the ring? or is there a bracket im missing as well a little unsure as manual says with or without oil cooler but is not very descriptive when comes to mounting filter?

cheers

http://photos-e.ak.fbcdn.net/hphotos-ak-ash1/hs456.ash1/25102_423560043377_533003377_5312625_8204992_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-ash1/hs456.ash1/25102_423560048377_533003377_5312626_5391260_n.jpg

[Todd]

the filter has a rubber O ring on it, and yes it will seal itself. as long as the machined surface is nice and flat you wont have a problem. please remember to lube the two mating surfaces (hehehe) with some oil before tightening the filter onto the thread, otherwise you will have a hard time removing it at the next filter change.

[shift_rook]

isn't there a filter mount meant to be therte todd? you blind motherfucker, if it turns out you need the mount i'll send ti your way for free, just pay $10 for postage, i'm not doing anything with it

[shift_rook]

dw, turns out what i have is for an oil cooler or some shit?

edit* ok now i'm jsut real confused? my smallport doesn't have that bit, but, the bit doesn't have any sorta outlet for an oil cooler.... anyone care to explain. the bit i'm referring to is off a bigport

[slide86]

hey buddy, was going to PM this to you, but may help others so:

http://www.ae86drivingclub.com.au/dcimages/5/40333.jpg

i got mine from CMI toyota on waymouth st in the city. although i got the extended one that fits the oil cooler type, but the one i have shown is if you arent running it.

BTW i have the oil cooer plate and adaptor here that i dont want anymore if you are interested :shocked:

edit, just so you know, the part number you need is 90404-19001

[shift_rook]

aaaaaah, yeah, guess mine sis for a coolel... well there you go, thanks slide

[keimeier]

hey

thanks very much boys for the replies. ae70 has got one for me so once i see him should be all sorted.

i was just confused to wether the bracket was necessary or not. but obviously not

thanks again

[Todd]

isn't there a filter mount meant to be therte todd? you blind motherfucker

i presumed the OP was already getting the union bolt (which he mentions in the first post, but is obviously not there in the photo) which is all you need to mount the filter.
:)

[shift_rook]

yeah, well..................... nah i'm not gonna win this, i fail

[keimeier]

also what is the hole down the bottom of my sump? should there be a sensor? or jus plug it?

[keimeier]

^^last pic

[slide86]

you have a smallport sump.

that hole is for the return of the factory oil cooler setup.

just block it with an appropriate bolt and washer

[keimeier]

thanks slide86 you have been most helpful