View Full Version : JDM Rwd 4age Loom
deanoo
2nd April 2010, 09:37 AM
Bought a jdm rwd 4age loom for my brothers ke70, installed it all the injectors, tps, dizzy, coil etcc are connected but i have noticed that i have no wires for the alternator and starter motor?
Is there a seperate loom for the starter motor and alternator? i have also noticed that there are two plugs that connected into something but not really sure. one plug is white with 6pins and the other is a black plug with about 8 or so inputs
if anyone has any idea lease let me know
Sam-Q
2nd April 2010, 10:11 AM
there is not a seperate loom for the alternator externally but under the plastic cover it's seperate if that makes sense. It's easy to make up. The starter motor circuit is fully independant and you use your original. I can also make some cable up for you should you need it.
deanoo
2nd April 2010, 07:33 PM
well ive got to plugs just sitting there doing nothing? and i have no loom for alternator and starter and no cables for power going to the battery...
Sam-Q
3rd April 2010, 12:22 AM
you can make it up yourself as they are quite straightforward, there are letters on your alternator socket that let you know what they are. Doing a search on here will show you what means what.
You can buy power cables form auto stores or I can make you something for a modest fee, but I am not looking for work
deanoo
3rd April 2010, 01:37 AM
well is there any links on the site so i can find this diagram? i have searched and cant find anything...
jdm86gtz
3rd April 2010, 10:43 AM
Use the cars original alternator and starter wires. Post a picture of the two plugs and I'll tell you what's what, but it's sounds like you have an early loom with a black connector near the water temperature sensors yeah? If so Yellow connects to 12V for injectors, black/orange connects to 12V for igniter and various other ignition fed components, black/white is for starter solenoid, yellow/green is for water temperature gauge, yellow/black is for oil pressure gauge/light, red/blue & red/black are for reverse light switch and black/red rings is for rev clock. Does the white plug contain mostly blue/XXX wires? If yes these are for wiper motor and washer pump.
Alexii
3rd April 2010, 06:10 PM
i got some photo of the plugs i was talking about
jdm86gtz
3rd April 2010, 11:01 PM
The black plug is same as AE86 early loom plug but it's missing a couple of wires, I can see the starter solenoid wire, reverse light wires and the other two I can't make out but one looks yellow so probably the gauge sensor wires. The white plug I've never seen before, what did the loom come out of? A Carina AA63 maybe or was the loom previously modified maybe. Go off the colours I posted above as in any generation of 4AG I've seen the wire colours have been the same. Not sure on the thin white wire in the white plug but have a look through the loom for the other end and confirm with a multimeter, black/red line is usually +B so trace the wire maybe to the four injectors.
Alexii
4th April 2010, 05:52 AM
the loom came out of a jap ae86 uncut.
the starter solenoid wire, is that the single black wire that is by itself?
also the big black plug i found out some more info apparently it plugs into the ae86 car loom which is for the tacho etc... nothing to do with the injectors and that, well thats what i read anyway...
Powered by vBulletin® Version 4.2.3 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.