PDA

View Full Version : ST 20v 1993 AE95 4WD Corolla wagon.



Instigator
22nd April 2010, 05:25 PM
Vehicle information: 1993 Toyota Corolla SR5 4WD with 20v 4AGE engine conversion.

Condition: Ok guys decided to sell my wagon as I can't seem to get the time to fix it right now and want a 4wd to tow my mates boat.

Details are: I bought the car with no comp on the 3rd cyl on the 4AFE. Pulled it out and did a ST 20v conversion from a Just Jap halfcut in June 09. Has been my daily since.

Motor had 116k kms when I put it in, I think I've put about 10 - 15k on since then. Fuel economy is an average of 7.2L/100kms.

Body has 420x kms on it.
Towball.
As is usual with the cars of this vintage the paint is peeling on the roof and bonnet.
Interior is in pretty good condition for it's age, few stains on the front seats but other than that excellent.
Central locking AND dashmat! :shocked:
Has a 2 1/4" exhaust with a Skyline cat. ($700 when conversion was done)
Exhaust is very noisy and would benefit from having the front half remade with a new flex joint (I just hooked the new back half onto the front from the cut).
Needs new shocks at least in the rear, is very bouncy but still fine to drive.
Dent in the right rear from me reversing into a tow ball.
Front bumper is a bit pushed up from a small love tap.
Remote control Sony MP3 CD player.
Sony Xplod 6x9s in moveable pods.
Sports steering wheel.
Tyres are ok, will need doing soon.
Rego till August or Sept.
5% tint on all rear windows, 15% on the front two (this was only done 2 months ago).
Air con not working, all the lines are still there, and the condenser from the 20v is still on the motor so you'd need to get the ends of the lines changed the suit the 20v a/c, regas and wire it up.


Zee problem:

Clutch has given up the ghost. 99% sure the clutch plate is fine (new Exedy 12 months ago) would probably just need a new pressure plate but can't say until it's pulled out which I don't have the time to do. It's a motor out job and with a new girlfriend and recent promotion I don't have the time like I used to to fix it :bash:

Only got a couple if pics here at work. If there's interest I can take more Sat morning.

Day I bought her. Minus hubcaps and weather shields now.

http://i95.photobucket.com/albums/l125/Instigator827/04102008262.jpg

Halfcut

http://i44.tinypic.com/14mzzg3.jpg

Empty bay

http://i95.photobucket.com/albums/l125/Instigator827/barebay.jpg

4WD gearbox for anyone interested

http://i95.photobucket.com/albums/l125/Instigator827/4wdgearbox.jpg

20V about to go in

http://i95.photobucket.com/albums/l125/Instigator827/20v2.jpg

Done

http://i40.tinypic.com/nydz6r.jpg


Car still runs and drives. I'm quite happy to take interested parties for a drive but unless you know how to drive clutchless and pony up cash don't expect to drive it.

Price: Would like around $3.5k given the car owes me a lot more than that but am open to NEGOTIATION, if you would like to offer $500 please find a more productive use for your time.

Location: Penrith, West Sydney.

Contact: PM, email foxboy666@hotmail.com phone 0433 314 593

Instigator
1st May 2010, 04:48 PM
B to the UMP

Not even any questions? :(

New pic to show tint.

http://i41.tinypic.com/jb4503.jpg

Price drop 3k this week only. Otherwise I'll have to get my finger out and fix it :right:

Instigator
10th May 2010, 11:35 PM
Now $2500

rthy
10th May 2010, 11:41 PM
try twincam.info?

Instigator
10th May 2010, 11:52 PM
Thanks, posted on there.

Instigator
1st June 2010, 06:12 PM
$2k and about to go on eBay

Instigator
10th June 2010, 10:51 AM
$1800 want this gone bought a Hilux Surf that needs mods :P

Rego till 28th August IIRC.

Instigator
20th June 2010, 04:30 AM
BUMP no one wants a 20v?

Instigator
7th August 2010, 03:28 AM
Still for sale and regos running out. No one wants a good nick running 20v for a conversion?