PDA

View Full Version : Bass head unit + cabs (melb east)



WAcky
25th April 2010, 06:11 PM
Heya,

Haven't played the bass now for a few years so it's time to get rid of the gear and fund a re-spray.

BUY TWO OR MORE ITEMS FOR 10% OFF


Gallien Krueger 1001rb-ii - $950 FIRM

website stats:
- 700watts (4ohms) plus 50 watt Horn Bi-Amp System
- Active 4-band EQ
- Adjustable Contour, Presence & 4/5 String voicing
- Boost (Valve Effect)
- Seperate Tweeter & Woofer volume controls
- Effects loop & Tuner out with Mute
- XLR out with Level, Ground Lift & Pre/Postswitch
- Speakon & 1/4" outputs
- 19x3.5x8 (2 rack spaces)
- 22 lbs (10kg)

This is in pretty much perfect condition. last time i took it in to get the jack replaced I had a bunch of points re soldered. It has a little crackle on three of the knobs but its quiet. It wouldnt hurt to have it serviced and cleaned out of any dust that may have built up in the pots (causing the crackling) and checking if any of the solder points have dried. I tested it today and it looks to be working perfectly.

This thing is f'ing loud. I used it will the cabs listed below and had it on probably 1/10th of its capable volume if that.

http://jsmusic.com.my/jsmusic/images/GK/1001RB.jpg




Warwick 411pro Bass Cab - $800 FIRM

website stats:


Power rating: 600W (max. 800W)
8 ohms
106dB
4 x 10" speakers (power rating 150W, max. 200W, 8 ohms, 94dB, resonant frequency: 50Hz, frequency range: 45Hz-3500Hz)
HF horn with attenuator (power rating 30W, max. 40W, 8 ohms, 95dB, resonant frequency: 2,5kHz, frequency range: 1,2kHz-20kHz)
Bass reflex housing
Weight: 39 kg
Dimensions (W/H/D): 0,62 x 0,67 x 0,49 m

Some crackling in the horn adjuster knob @ rear. Otherwise in perfect working order.

http://www.drumza.com/images/Warwick411Pro600WSpeakerCabinetStandard.jpg




Warwick 115pro Bass Cab - $550 FIRM

website stats:


Power rating 300W (max. 400W)
8 ohms
98 dB
1 x 15" speaker (power rating 300W, max. 400W, 8 ohms, 98 dB, resonant frequency: 35Hz, frequency range: 30Hz-3000Hz)
Bass reflex housing
Weight: 29 kg
Dimensions (W/H/D): 0,62 x 0,67 x 0,49 m

In perfect working order.

http://www.drumza.com/images/Warwick115Pro400WSpeakerCabinetStandard.jpg




Free speakon cable with each cab.
These cabs are reeeallly loud and smooth as.
Serious buyers can come and test anything out with their own gear. Its a residential house so its not an ideal place to test out this equipment as the windows and shit start shaking before you even turn it up.
Head unit can be posted with insurance around Australia for around about $50 give or take $10-15.
The cabs are between 30 and 40kg each! So pickup in melbourne east only!
Dont post stupid offers. These prices are firm and I'll just ignore any :steamer: offers.
No castors are included. They break as soon as they hit a bump. I went through so many sets of castors and just gave up on them.