20v Bottom end gaskets and seals!

[blair]

Where to get them? and Part numbers?

I'm in bris.

Need oil pump gasket, and Rear Main Seal. Already got HG coming.
I'm getting rings, bearings and thrust washers through ACL for smallport (same for SP/Silvertop yeh?)
But they dont list any bottom end seals or gaskets for the 20v... are they jus the same as SP aswel?

Cheers! Blair.

oh P.S im only using the 20v BOTTOM END, so getting a VRS/Gasket KIT is not a feesable option.

:)

[Nikkojoe]

Rear main seal is the same as a 4ac rear main (4a's are all interchangable). Can be had from any parts shop, usually in stock.

Oil pump gasket, either make one up or get a genuine one. Genuine is about $14

15197-15030 or 15197-16030 or 15197-15012 should all work (I know the last number is the most common)

[blair]

Perfect response. cheers mate!

[Sam-Q]

would the front seal off the 4ac also be the same?

[Nikkojoe]

Yep, 2a, 3a, 4a, 5a, 6a and 7a all share same seal (according to epc anyway).

[H8CHIR6KU]

i know the thread is about bottom end seals but i thought i would mention anyways...

make sure to get the correct cam seal for the motor. 16v, st, bt all have a different cam seal on the normal, vvt and vvti cam. all can be bought from toyota though