leigh4110
12th May 2010, 10:03 PM
hey all,
$$1,600 ono!!
so i've picked up a CA18DET pretty cheap off a friend, and now wanting to get rid of my 4age stuff as i have no plans on using it ever again. it consists of:
1- 4age Bigport 16v engine.
2- T50 gearbox
3- 4age loom
4- computer
5- tailshaft to suit borgwarner.
6- 4-1 extractors
7- 2 1/4 exhaust with a resonator and muffler
8- 4 A-C radiator + thermo fan.
1. engine could use a freshen up, new rings etc.. and blows a lil smoke when its cold. (only been in my car about a month) RWD motor.
2. T50 selects and drives fine, whiney in 3rd and 5th however.
3. all complete wiring to have the car running straight away.
4-
5 tailshaft obviously suits T50 box to borgwaner diff. standard AE71 tailshaft.
6- self explanitory
7 exhaust is welded to the extractors so i will cut them and will just need to be re-welded.
8-
so pretty much the only things that are no included will be the clutch master cylinder and the pedalbox or the engine cross-member.
NOTE: if you would like the AE71 crossmember, i can exchange it with your KE crossmember as im just going to cut the mounts off anyway..
**1600 ono.
contact leigh on 0418-221-075.
cheers.
$$1,600 ono!!
so i've picked up a CA18DET pretty cheap off a friend, and now wanting to get rid of my 4age stuff as i have no plans on using it ever again. it consists of:
1- 4age Bigport 16v engine.
2- T50 gearbox
3- 4age loom
4- computer
5- tailshaft to suit borgwarner.
6- 4-1 extractors
7- 2 1/4 exhaust with a resonator and muffler
8- 4 A-C radiator + thermo fan.
1. engine could use a freshen up, new rings etc.. and blows a lil smoke when its cold. (only been in my car about a month) RWD motor.
2. T50 selects and drives fine, whiney in 3rd and 5th however.
3. all complete wiring to have the car running straight away.
4-
5 tailshaft obviously suits T50 box to borgwaner diff. standard AE71 tailshaft.
6- self explanitory
7 exhaust is welded to the extractors so i will cut them and will just need to be re-welded.
8-
so pretty much the only things that are no included will be the clutch master cylinder and the pedalbox or the engine cross-member.
NOTE: if you would like the AE71 crossmember, i can exchange it with your KE crossmember as im just going to cut the mounts off anyway..
**1600 ono.
contact leigh on 0418-221-075.
cheers.