AIROCOBRA
26th May 2010, 05:25 PM
Hi , GUYS ,
I have fitted a MB444 NISSAN 15/16 BRAKE MASTER CYLINDER to my AE86 ADM .
Bleed up OK , even after adjustment I have to much foot pedal movement before brake engages . I am running RX7 FRONT brakes WITH S13 REAR DISC/WITH JDM CALIPERS. Rear brake bias valve has been removed . Brake seems to work OK , but only when half way to the floor ? Previous std AE86 M/C did not have this drama , but needed to be replaced due to a small leak at the back of the M/C .
Any one come across this problem ?
I have fitted a MB444 NISSAN 15/16 BRAKE MASTER CYLINDER to my AE86 ADM .
Bleed up OK , even after adjustment I have to much foot pedal movement before brake engages . I am running RX7 FRONT brakes WITH S13 REAR DISC/WITH JDM CALIPERS. Rear brake bias valve has been removed . Brake seems to work OK , but only when half way to the floor ? Previous std AE86 M/C did not have this drama , but needed to be replaced due to a small leak at the back of the M/C .
Any one come across this problem ?