parting out whole track car. all needs to go ...MASSIVE

[H8CHIR6KU]

all items sold

[DOG the rolla hunter]

pmed....panhard rod:sunnies:

[Dom86]

I'll take the battery set up and ultra brace mate, Pal, Buddy of mine.....

[H8CHIR6KU]

more parts added

[pornstrv]

u wanna sell the trumpets pm me

[civa]

what colour is the dash?

[dtour]

31. 86 jdm steering rack, new boots, tie rod ends, rack ends, used for a year... $140

power steering?

[Y-B-NRVS]

just pmed you

[BLIPAE86]

ill take no.9 & 11 posted to 2617 ACT

[Nikkojoe]

Ill take 20.

[twisted2]

im interested in disy sent you pm

[paul123]

Interested in the swaybars. Does anyone know if they will fit an AE71?

[checkers]

I'm interested to basically all exterior window plastics/trim if you've got them. though where are you located?

[H8CHIR6KU]

civa - black

dtour - they both manual racks

pornstrv - id prefer to sell them with the engine. if thats not sold within a couple weeks then i might seperate

[Nikkojoe]

I might take that dash too, pending what has been cut out. Nothing visible?

[H8CHIR6KU]

nah nothing visible tom

[white_sandshoe]

29 37 and 5 are totally for me!!!
Lock it in Eddy... we're going for the million.

Ok, jokes aside, those three I'll take off your hands, definately...

[Nikkojoe]

As long as the speedo cable mount is still there and the cluster mounts are there (or at least a few) then its all good to me :)

You are going out for one last slide this friday night? If so I'll come see you and pay deposit on 20. and 37.

[H8CHIR6KU]

cluster mounts are there but have to check speedo mount

abd yeah one last run on friday night which is why im not sending or parting anything until after sat

[munki]

pic of radiator to show condition? if its in great condish i will grab it.

[H8CHIR6KU]

someone may be picking up the radiator next week already

[H8CHIR6KU]

recieved all your replies. im not taking cash yet and will sort it all out this weekend. for those waiting, expect pms this weekend

[jdmke70kid]

pics of wheels mate cheers

[H8CHIR6KU]

wheels sold sorry

[H8CHIR6KU]

pms sent for those that expressed interest in items listed. ive found a garage to strip the car, had the last run on friday night. was sick but no i am going to cry for 3 days. parts that are paid for will get sent late this week.

payment details in first post and here

aaron-lee cole
bsb 066135
acn 00639757

use your name as referenc ethen send us a pm

[john84ie]

could i get the backing plates?

[H8CHIR6KU]

which backing plates?

[john84ie]

from the front brakes

[H8CHIR6KU]

i have a spare pair sitting around. you have pm

[Nikkojoe]

When would it be possible to pick up the clutch line setup?

[Touge Boy]

Is the panhard rod still available? And are the spare caliper brackets?

how much you after for the panhard, the hubs and the caliper brackets posted to adelaide 5092?

[DOG the rolla hunter]

pmed about panhard rod,let me know

[H8CHIR6KU]

tom - you can get them this weekend if you want
touge boy - andy san already asked for the hubs just waiting on his reply, john84ie is the same for the front brackets and dog the rolla hunter is getting the panhard rod

[lach]

'19. full set trd trailing arm bushes, never used... $180'

still got these?

[H8CHIR6KU]

still got them. someone wants these already. i have pm'd him but noi reply yet. if no reply soon they can go out to someone else

[kerola]

ill take black 15cm dildo
if you still have?

[H8CHIR6KU]

yeah i still got it send me a pm with ypur details

[FLT LNR]

Pm sent

[H8CHIR6KU]

pulling parts out today and posting for those that have paid

[DOG the rolla hunter]

shit yeah , strip that shit

[H8CHIR6KU]

more parts added

[H8CHIR6KU]

bumpp

[jas1088]

still have the dash by any chance?

[H8CHIR6KU]

yes i do

[H8CHIR6KU]

Updated

[Celica RA45]

still waiting for pics of fuel tank glenn

[H8CHIR6KU]

shit forgot bout those pics, sorry

pm me your mobile number and i will msg them to you cause my internet is capped

[Nikkojoe]

what colour is that jdm passenger seat?

[H8CHIR6KU]

blue tom

[Nikkojoe]

Ah if it were black I would have got it.

Will look a little out of place in my interior

[FLT LNR]

Pm sent

[H8CHIR6KU]

anyone want the engine package or shell? need these gone the most

[Dom86]

I'll give you $450 for both. *Awaits stupid reply*
But seriously, did Tom take the dash? If not I may still be instersted.....

[H8CHIR6KU]

.......

nah tom hasnt taken it yet. still interested tom? otherwise come pick it up

[Nikkojoe]

I was before but ive already got a black dash, has a crack but wont see it under my dash mat. Gotta stop collecting too much shit i don't really need :P

Clutch setup is what i needed right now anyway :)

[lach]

did the trd control arm bushes end up selling? I'm pretty keen to grab them.

[H8CHIR6KU]

yeah rd bushes are gone

[H8CHIR6KU]

1. 4age st 20v. motor had done 80k then been freshened up when put in. all new genuine seals, head recond, trd .8mm headgasket, new t.belt etc. i.e everything done. used rs chtia kit with 2nz coils, genuine 86 water pump. rwd alt bracket 20v alt, lightweight wp pulley, with adaptronic all tuned. makes 120hp atrw with room for improvement, using vdo guages for water temp, tacho, and voltage, also has oil temp and pressure but not hooked up, with senders, trumpets and 8 socks, genuine top and bottom hoses, new starter motor, 2lt catch can... $3900 plus free freight

2. lightweight 20v exedy flywheel with heavy duty clutch kit. suit all 86 4age, been run with t-50...$580

7. t3 rca... $100

8. 1 pair used 86 lca with nolathane bushes and new balljoints. been used for a year... $50


11. standard castor rods with nolathane bushes... $50

13. 86 t-50 gearbox xmember, id say it was the original one, but good nick... $40

14. 86 front subframe... $150

26. 1 original clutch fan... $10

30. 86 adm steering rack, nolathane rack bushes, new boots, new tie rod ends, new rack ends, has ajps lock spacer already... $180


31. 86 jdm steering rack, new boots, tie rod ends, rack ends, used for a year... $140

32. 86 pedals with jdm accelerator, new rubbers.. . $120

33. fuel setup, aluminium tank that fits in the spare wheel well, holds 25lt, using sr20 pump for pickup to 2lt surge tank, running to bosch vl main pump... $400

37. uncracked 86 dash. has some plastic cutout behind the cluster... $200

39. 86 chassis, with all panels, fuel door been welded shut, straight chassis completely spot welded, both front guards, minor damage to rhf guard, outside in primer, inside in blue, underbody and engine bay in black, jdm passenger door, different rhf adm door in different colour, minor damage to rhr quarter panel. i.e minor bog work. damage from small hit in tyre wall. most damage taken from jdm door which has been replaced. polycarbonate quarter windows. new front windscreen, all rust cut out, rust free hatch with ducktail wing and polycarbonate window, adm front and rear bumpers cannot be regoed, whiteline tail lights with centrepeice no cracks, indicator lens slightly different orange left to right, adm headlights and indicators, spare hatch and passenger adm door... $2400

40. jdm passenger seat, no play in rail, no tears... $50

41. electronic distributor with vacuum advance to suit 4age carb setup, just swap drive gear from 4age dizzy... $100

42. oil cooler setup. runs remote mount filter, 13 row cooler, all earl fittings, all -10, braided hoses, no china shit, uses z9 filter. filter sits under battery bracket using original wholes in chassis rail... $400

46. front brake caliper brackets....$50

47. castor rod brackets... $40

48. 2x go pro moto cams, suction pad and sticky pads, data cable, case etc... $125 each

49. medium race suit worn 6 times....$150

51. goss brand sr fuel pump new in box... $90

52. nrca's, used with bolts... $70

53. rebuilt jdm brake master cylinder, never used... $90

54. silvertop 20v ecu m/t... $80

55. drift tengoku magazines 06/09-06/10... $10 each

55. used t3 drift knob button thing, blue $10

56. new t3 drift knob button, red $15

57. genuine 20v timing belt, fitted once and did 1km, all ok , was spare for the track $25

[H8CHIR6KU]

http://www.ae86drivingclub.com.au/dcimages/1/9/9/550040.jpghttp://i604.photobucket.com/albums/tt126/H8CHIR6KU/DSC01994.jpg

[H8CHIR6KU]

more parts added

[keimeier]

pm sent

[v-tec dc2]

hey mate is the ecu still for sale, u cab send msg to 0411119832

[H8CHIR6KU]

the 20v ecu?

[H8CHIR6KU]

updated plus more parts

[chickpea]

is number 33 availiabl still?

[H8CHIR6KU]

yeah man. pics in post number 59. needs a general clean but works really well

[H8CHIR6KU]

bumpp

[vbrou1]

is the silvertop ecu still for sale

[H8CHIR6KU]

yeah you have a pm

[keimeier]

received fuel pump today. thanks mate :)

[stouty]

one go pro camera sold to me.

[H8CHIR6KU]

UPDATED

1. 4age st 20v. motor had done 80k then been freshened up when put in. all new genuine seals, head recond, trd .8mm headgasket, new t.belt etc. i.e everything done. used rs chtia kit with 2nz coils, genuine 86 water pump. rwd alt bracket 20v alt, lightweight wp pulley, with adaptronic all tuned. makes 120hp atrw with room for improvement, using vdo guages for water temp, tacho, and voltage, also has oil temp and pressure but not hooked up, with senders, trumpets and 8 socks, genuine top and bottom hoses, new starter motor, 2lt catch can... $3900 plus free freight

2. lightweight 20v exedy flywheel with heavy duty clutch kit. suit all 86 4age, been run with t-50...$580

8. 1 pair used 86 lca with nolathane bushes and new balljoints. been used for a year... $50

11. standard castor rods with nolathane bushes... $50

13. 86 t-50 gearbox xmember, id say it was the original one, but good nick... $40

14. 86 front x-member... $150

26. 1 original clutch fan... $10

32. 86 pedals with jdm accelerator, new rubbers.. . $120

40. jdm passenger seat, no play in rail, no tears... $50

41. electronic distributor with vacuum advance to suit 4age carb setup, just swap drive gear from 4age dizzy... $100

42. oil cooler setup. runs remote mount filter, 13 row cooler, all earl fittings, all -10, braided hoses, no china shit, uses z9 filter. filter sits under battery bracket using original wholes in chassis rail... $400

46. front brake caliper brackets....$50

47. castor rod brackets... $40

48. go pro moto cams, suction pad and sticky pads, data cable, case etc... $125 each

49. medium race suit worn 6 times....$150

51. goss brand sr fuel pump new in box... $90

52. nrca's, used with bolts... $70

53. rebuilt jdm brake master cylinder, never used... $90

55. drift tengoku magazines 06/09-06/10... $10 each

55. used t3 drift knob button thing, blue $10

56. new t3 drift knob button, red $15

57. genuine 20v timing belt, fitted once and did 1km, all ok , was spare for the track $25

[H8CHIR6KU]

need it gone guys

[hilux05]

hey aaron, got the lca's today. cheers man..

free bump..

[muller]

im after machanical speedo cable do u have one in your part out?

[bunkyskids]

pm sent

[WAcky]

pm sent

[JinxD]

pm sent

[H8CHIR6KU]

sorry no speedo cables. i didnt run a speedo cause the only time its useful is the only time i dont have a chance to look at it

[ae8zn6]

Dont suppose you have any inner guards for sale? after passenger side :S

If not, free bump

[JinxD]

get my pm re NRCA's Dude ?

[H8CHIR6KU]

sorry man i thought i replied to that. sold sorry

[H8CHIR6KU]

update


1. 4age st 20v. motor had done 80k then been freshened up when put in. all new genuine seals, head recond, trd .8mm headgasket, new t.belt etc. i.e everything done. used rs chtia kit with 2nz coils, genuine 86 water pump. rwd alt bracket 20v alt, lightweight wp pulley, with adaptronic all tuned. makes 120hp atrw with room for improvement, using vdo guages for water temp, tacho, and voltage, also has oil temp and pressure but not hooked up, with senders, trumpets and 8 socks, genuine top and bottom hoses, new starter motor, 2lt catch can... $3900 plus free freight

2. lightweight 20v exedy flywheel with heavy duty clutch kit. suit all 86 4age, been run with t-50...$580

8. 1 pair used 86 lca with nolathane bushes and new balljoints. been used for a year... $50

11. standard castor rods with nolathane bushes... $50

13. 86 t-50 gearbox xmember, id say it was the original one, but good nick... $40

14. 86 engine x-member... $150

26. 1 original clutch fan... $10

32. 86 pedals with jdm accelerator, new rubbers.. . $120

40. jdm passenger seat, no play in rail, no tears... $50

42. oil cooler setup. runs remote mount filter, 13 row cooler, all earl fittings, all -10, braided hoses, no china shit, uses z9 filter. filter sits under battery bracket using original wholes in chassis rail... $400

46. front brake caliper brackets....$50

47. castor rod brackets... $40

48. go pro moto cams, suction pad and sticky pads, data cable, case etc... $125 each

49. medium race suit worn 6 times....$150

53. rebuilt jdm brake master cylinder, never used... $90

55. drift tengoku magazines 06/09-06/10... $10 each

55. used t3 drift knob button thing, blue $10

56. new t3 drift knob button, red $15

57. genuine 20v timing belt, fitted once and did 1km, all ok , was spare for the track $25

i think thats about it. i do need this gone so am open to reasonable offers only

[H8CHIR6KU]

bumpo

open to offers

[munki]

is the flywheel a 212mm one? would you separate from the clutch?

[H8CHIR6KU]

yeah is 212mm one. id do the flywheel for 450 and can have the clutch for free

on another note i am going to japan today and wont be contactable until the start of september.
if no reply to pms dont stress just wait

[CRONIK]

hey man would you separate the trumpets and socks?

[shinobichart]

any of these still available?

[H8CHIR6KU]

nah man all sold last august