ae86 spindle nut, alternatives

[ke70dave]

afternoon folks,

simple question,

final stages of my ae86 gear going into car, and i cant seem to find the nut and funky washer that sits on the end of the spindle (hold the hub on), as well as the locking washer and split pin.

so my question is what spindles are the same as ae86? so i can go to the wreckers and just get the bits i need.

i need to get all the things inside the red circle.

http://www.ae86drivingclub.com.au/dcimages/2/0/2/49056.jpg

suggestions anyone?

[timbo]

not too sure what you could get them from but i just got brand new grease caps from toyota for $8 each. they are much tighter fitting than the old ones which had started leaking. im sure that toyota would carry those parts you need.

edit: everything is the same on the stub axle with adm & jdm.

[Todd]

yeah dude as timbo said, go into toyota with a printout of that diagram and explain the car etc. they will sort you out.

you wouldnt be spending more than 30 bucks im sure.

[lords]

I just redone mine. Got them through ajps at $35 per side. Didn't have the nut locks though.

[ke70dave]

yer i got new wheel bearings and all that, fitted them this arvo.

but yer the nuts didnt come with the hubs/axel

i shall give toyota a go, never considered it actually for simple stuff like this.

but sounds like it might be a good option!

[Sam-Q]

self serve wrecker? I am sure ke70s are the same

[Todd]

oh and don't forget new split pins!!

[ke70dave]

yer i have some brand new split pins

and yer samq im heading to the wrecker on wed morning to check on ke70, i though ke70 had different spindles though?

though i guess the bolt/washer thing could be the same.

[Sam-Q]

yeah I don't know exactly but easy to check

[dtour]

http://www.toyodiy.com/parts/diag_AI3elK.png

42611B BOLT, HUB (FOR FRONT AXLE)
90942-02048 AE8* 8 $5.74
43502 HUB SUB-ASSY, FRONT AXLE
43502-12070 AE8* 2 $183.18
43510A SEAL, OIL (FOR FRONT AXLE HUB)
90311-41123 AE8* 2 $8.90
43510B BEARING, TAPERED ROLLER (FOR FRONT AXLE INNER BEARING)
90368-29068 AE8* 2 $29.89
43510C BEARING, TAPERED ROLLER (FOR FRONT AXLE OUTER BEARING)
90368-17017 AE8* 2 $43.06
43510D WASHER, CLAW (FOR STEERING KNUCKLE WASHER)
90214-16010 AE8* 2 $1.68
43510E NUT (FOR STEERING KNUCKLE)
90170-16137 AE8* 2 $2.34
43512 DISC, FRONT
43512-12130 AE86 2 $130.26
43514 CAP, FRONT HUB GREASE
43514-20010 AE8* 2 $4.37
43525 CAP, FRONT WHEEL ADJUSTING LOCK
43525-20011 AE8* 2 $4.14
90119-10070 *** STD. PART $1.14
95381-04025 *** STD. PART $0.79

All new do it right :)

[ke70dave]

damn...thanks dude....

consider it printed.