injectors question

[wth03]

hi guys:
just a quick question!
i just wanna know if a JDM big port 4age ECU running with high impedance injectors will occur any damage at all?
apprently i have got a set of cams 272' and 264', what size of injectors should be good to run with? coz i am not too sure what sort of power will pull out from these cams

thanks

[Jonny Rochester]

If you don't have a programable ECU, you always need to run the exact same injectors the ECU was originaly matched too (or of the same flow rate at least).

[Andy San]

jonny is correct, and i was maxxing out standard injectors with those size cams

[wth03]

Thanks for the reply
I do understand to run the standard injectors with the standard ecu is better
but what it was...I blew up my jdm big port motor and get myself a small port 100kw motor instead.
The ecu I am using now is jdm ecu plus emanage blue with full optional wiring.
And for the injectors I have a set of 7mge, standard 100kw injectors and also a set of evo9 injectors. 2 set of toyota one are high impedance only the evo one is low impendance, but it will be way to big for a na car.
So Should I try the 100kw injectors or the 7m one?????