DRFTR86
5th February 2009, 06:18 PM
After only having this engine running since November, I’ve caught the boost bug as my new daily is turbo, so to make way for a filthy Nissan CA18DET, I have to get rid of my 4AGE either together as a whole or in parts. So here it is, everything other than the bottom end, everything else is only around 300kms old
Hybrid 4AGE
Bigport 7 Rib Bottom end
Smallport Cylinder Head
Fully ported and polished
HKS Valve Springs
Wade 800A Cams
20V 4AGE Independent Throttle Bodies
Techno Toy Tuning Inlet Manifold
Techno Toy Tuning Vernier Cam Gears
Techno Toy Tuning Velocity Stacks
TRD Ignition Leads
Unifilter Socks
Adaptronic Engine Management System
Im chasing $3500 with ECU and Loom or $3000 without, will not post interstate so to melbourne peeps only for package as a whole, has new rocker cover gaskets, distributor seal, cam seals, rear main, resealed sump, spigot bearing. All these gaskets/seals were installed on my Christmas break and haven’t been driven on yet.
or otherwise
Bigport 7 Rib Bottom end (very healthy, have not comp tested since bigport head was pulled off and replaced) - $200
Smallport Cylinder Head, been fully ported and polished ($1000), HKS valve springs ($280) and shimmed to 10 thou ($950) to suit the Wade 800A Camshafts ($460) - $ 1800
20V 4AGE Independent Throttle Bodies - $150
Techno Toy Tuning Inlet Manifold - $250
Techno Toy Tuning Vernier Cam Gears - $200
Techno Toy Tuning Velocity Stacks (will come with unifilter socks) - $200
TRD Ignition Leads (suit bigport) - $50
Adaptronic Engine Management System (loom included to suit engine running smallport distributor w/bigport cap, bigport igniter and coil and 20v silvertop cas) - $900
WILL POST PARTS IF THERE IS NO INTEREST IN PACKAGE AS A WHOLE
Note. Also have a set of TRD copy extractors and a 2.25 over diff exhaust, very loud with this motor, lots of back pressure because of cams, would suit a stock 4AGE. $200
And a dirty T50, was running behind motor with a blown rear main, shift was good, never crunched on me - $250 with a 20,000 km old exedy heavy duty (unaffected by leaking rear main seal)
Location Melbourne SE Suburbs
Cheers Richard
http://i244.photobucket.com/albums/gg4/dkae86/09082008297.jpg
http://i244.photobucket.com/albums/gg4/dkae86/14042008070.jpg
http://i244.photobucket.com/albums/gg4/dkae86/th_08102008015.jpg (http://s244.photobucket.com/albums/gg4/dkae86/?action=view¤t=08102008015.flv)
note: Video was first start up
will get more pics of closer items, exhaust, leads etc asap
Hybrid 4AGE
Bigport 7 Rib Bottom end
Smallport Cylinder Head
Fully ported and polished
HKS Valve Springs
Wade 800A Cams
20V 4AGE Independent Throttle Bodies
Techno Toy Tuning Inlet Manifold
Techno Toy Tuning Vernier Cam Gears
Techno Toy Tuning Velocity Stacks
TRD Ignition Leads
Unifilter Socks
Adaptronic Engine Management System
Im chasing $3500 with ECU and Loom or $3000 without, will not post interstate so to melbourne peeps only for package as a whole, has new rocker cover gaskets, distributor seal, cam seals, rear main, resealed sump, spigot bearing. All these gaskets/seals were installed on my Christmas break and haven’t been driven on yet.
or otherwise
Bigport 7 Rib Bottom end (very healthy, have not comp tested since bigport head was pulled off and replaced) - $200
Smallport Cylinder Head, been fully ported and polished ($1000), HKS valve springs ($280) and shimmed to 10 thou ($950) to suit the Wade 800A Camshafts ($460) - $ 1800
20V 4AGE Independent Throttle Bodies - $150
Techno Toy Tuning Inlet Manifold - $250
Techno Toy Tuning Vernier Cam Gears - $200
Techno Toy Tuning Velocity Stacks (will come with unifilter socks) - $200
TRD Ignition Leads (suit bigport) - $50
Adaptronic Engine Management System (loom included to suit engine running smallport distributor w/bigport cap, bigport igniter and coil and 20v silvertop cas) - $900
WILL POST PARTS IF THERE IS NO INTEREST IN PACKAGE AS A WHOLE
Note. Also have a set of TRD copy extractors and a 2.25 over diff exhaust, very loud with this motor, lots of back pressure because of cams, would suit a stock 4AGE. $200
And a dirty T50, was running behind motor with a blown rear main, shift was good, never crunched on me - $250 with a 20,000 km old exedy heavy duty (unaffected by leaking rear main seal)
Location Melbourne SE Suburbs
Cheers Richard
http://i244.photobucket.com/albums/gg4/dkae86/09082008297.jpg
http://i244.photobucket.com/albums/gg4/dkae86/14042008070.jpg
http://i244.photobucket.com/albums/gg4/dkae86/th_08102008015.jpg (http://s244.photobucket.com/albums/gg4/dkae86/?action=view¤t=08102008015.flv)
note: Video was first start up
will get more pics of closer items, exhaust, leads etc asap