JDM 86 Rear Swaybar Bushings?

[KurtHS]

Looking to get some new rear swaybar bushings for JDM 86 but cannot find ones that fit, tried some SuperPro ones that were meant to fit but they didn't (SPF0873-_ _K), I might get another set and try them again but can anyone provide some more info on this?



Thanks, Kurt.

[takai]

Pretty sure the __ in the part number is the diameter of the bar in mm.

[KurtHS]

Yeah but the diameter wasn't the problem

[takai]

Then the useful part of your post would be telling us why it didnt fit... unfortunately i cant find anything like that in your post.

[Jonny Rochester]

I am using the old bushes for the 13mm bar, but I am using a 14mm bar. It is snug, and works well. I think I also had trouble buying polyurathane ones, which is why I still use the old ones.

[DOG the rolla hunter]

i just got ones with the right diameter hole but they were too big for the d bracket so i ground them down with a angle grinder

[AJPS]

youll need a ke70 d bracket for that bush

arent jdm bars 15mm?

[Andy San]

JDM swaybars are the same size as ADM

[KurtHS]

Takai - Yeah for some reason I thought there'd be a generic answer as this has surely happened to quite a few people.

The bush is actually too 'high' for the bracket, so the bracket it won't fit over correctly.

[KurtHS]

Turns out that an MR2 bush fits, I''ll put the part number up shortly after I find the piece of paper I wrote it on!

[Jonny Rochester]

JDM swaybars are the same size as ADM

There are 3 standard bars. 13mm, 14mm and 15mm. The GTV came with 15mm (can also be found on RA60). Aussie spec mostly came with 13mm, but some have 14mm. GT-Apex probably have 14mm, but some may have 13mm.

[AJPS]

^ thought i wasnt tripping