AE092
25th August 2010, 09:28 PM
Car is going into the workshop tomorrow to get the head swapped over with new seals/gaskets/big port cams ect.
Anyway, I'm going to have the Ignition Timing set at 12 degrees (stock is 10) but was wondering what the Intake and Exhaust should be? I remember vaguely that the Intake should be advanced 3 degrees and the Exhaust retarded 1 to make the most of the bigport cams? I've got TRD style adjustable cam gears (the one with the 3 pair of dowels for adjustment) so don't know how much adjustment can't be had.
Anyway, engine is a small port with big port cams with exhaust and intake mods. Any help would be awesom
Anyway, I'm going to have the Ignition Timing set at 12 degrees (stock is 10) but was wondering what the Intake and Exhaust should be? I remember vaguely that the Intake should be advanced 3 degrees and the Exhaust retarded 1 to make the most of the bigport cams? I've got TRD style adjustable cam gears (the one with the 3 pair of dowels for adjustment) so don't know how much adjustment can't be had.
Anyway, engine is a small port with big port cams with exhaust and intake mods. Any help would be awesom