Worked 4age 16v Head

[TUF_086]

LOADS OF PARTS ADDED!!!


Hey guys selling my worked head ive had built up as ive got a whole motor package.......

4age Biport head
-new trd valve springs
-new stainless over sized valves
-bronze guides
-3 angle valve job
-massive amount of port work.
-ivan tighe cams biggest u can run on std shim setup approx 292 8.2mm
-bead blasted
-crack tested
-pressure tested

Everything is setup ready to bolt onto a motor and make big hp!

After 2k owes me ALOT more.

In Tassie and will ship at buyers expense

pics up asap... can send pics to genuine buyers phones.


PARTS ADDED BELOW!! PM ME!!!

[levinracer]

hey mate i might be intersted. can you give me the flow figures on this head. who ported it?

any chance of some pics of the ports and combustion chamber?

just curious, would you sell without cams and valve springs?

brad

[TUF_086]

Hey dude wanna sell as a whole setup but at the best ill pull the cams out

Work was done by Mark Steel he does alot of stuff for rally guys i cant find the flow bench results and cant get it redone as hes sold his flow bench due to pple not wanting to fork out the coin to have work done.

Im posting pics up now he done a shitload of work in the ports relaxing for the oversized valves.....

The valve grind was finished by hand also.

New acl valve seals also

[TUF_086]

http://img19.picoodle.com/img/img19/3/2/6/t_IMG0122m_0a517d9.jpg (http://www.picoodle.com/view.php?img=/3/2/6/f_IMG0122m_0a517d9.jpg&srv=img19)

http://img18.picoodle.com/img/img18/3/2/6/t_IMG0116m_9e81b81.jpg (http://www.picoodle.com/view.php?img=/3/2/6/f_IMG0116m_9e81b81.jpg&srv=img18)

http://img19.picoodle.com/img/img19/3/2/6/t_IMG0112m_5c5e142.jpg (http://www.picoodle.com/view.php?img=/3/2/6/f_IMG0112m_5c5e142.jpg&srv=img19)

http://img37.picoodle.com/img/img37/3/2/6/t_IMG0115m_d2a41d6.jpg (http://www.picoodle.com/view.php?img=/3/2/6/f_IMG0115m_d2a41d6.jpg&srv=img37)

http://img02.picoodle.com/img/img02/3/2/6/t_IMG0111m_0b5cf8e.jpg (http://www.picoodle.com/view.php?img=/3/2/6/f_IMG0111m_0b5cf8e.jpg&srv=img02)

[levinracer]

pm'd you.

[Wally]

fucking tough as.

[TUF_086]

fucking tough as.

Yes and i hope it'll go to someone who will make good use of it!!!

Now accepting part trades as part payment... i.e hot rims, parts for decent bottom end build, lsd for t series w series box upgrade... and nitrous system...

[TUF_086]

BUMMP

Gonna clear out random bits soon gotta round them up various bits from t18 ke70 ae86.....

[TUF_086]

Bump!

[TUF_086]

Ok guys just went though some of my shed and heres a few more bits....

2x ae86 gearbox xmembers
1x ae86 rack
1x ke70 rack
1x excedy heavyduty clutch 500kms old
1x 4age cas
1x t18 diff series 2 SOLD
1x t18 tail SOLD
1xae86 tail
1x ke70 auto tail
2x ae86 gearbox rubber stay bits
1x ae86 t50 box
2x t18 boxs one series 1 and 1 series 2
2x slaves ae86 Unknown condition.
1x clutch slaves good con
1x ae86 complete brake master assembly
1x whiteline centre bit
1x t18 struts complete
1x drivers rail modded for bucket
1x front ae86 swaybar and castor rod setup
1x t18 motor pakage complete motor
1x t18 3tc set of extractors and exhaust
1x ke70 engine xmember modded for 3tc
1x 4age coil and ignightor


i have 3 times this many parts to post up every std bit from t18s ae86 and ke70...

[evil86]

how much for the caster setup

[slideways]

what would you be after for the head minus cams?

also do you have the interior centre surround out of an ae86?

[markiitourerv]

What price on the clutch?

Also you haven't got any extractors have you?

[TUF_086]

pm'd guys regarding parts...

[Cerby86]

how much for the t18 tailshaft and diff??

[TUF_086]

BUmp!

[Mr Fujiwara]

is the head still for sale?

[TUF_086]

is the head still for sale?

Yes it needs to go!

Head no cams 1600
Cams 600

[TUF_086]

BUMP! T18 diff and tail sold!

[TUF_086]

Soon to be added worked 4age motor over 6.5k spent and s13 coilover front end setup with big brake upgrade...

[MJ86]

Ok guys just went though some of my shed and heres a few more bits....

2x ae86 gearbox xmembers
1x ae86 rack
1x ke70 rack
1x excedy heavyduty clutch 500kms old
1x 4age cas
1x t18 diff series 2 SOLD
1x t18 tail SOLD
1xae86 tail
1x ke70 auto tail
2x ae86 gearbox rubber stay bits
1x ae86 t50 box
2x t18 boxs one series 1 and 1 series 2
2x slaves ae86 Unknown condition.
1x clutch slaves good con
1x ae86 complete brake master assembly
1x whiteline centre bit
1x t18 struts complete
1x drivers rail modded for bucket
1x front ae86 swaybar and castor rod setup
1x t18 motor pakage complete motor
1x t18 3tc set of extractors and exhaust
1x ke70 engine xmember modded for 3tc
1x 4age coil and ignightor


i have 3 times this many parts to post up every std bit from t18s ae86 and ke70...

Where are the prices?

[TUF_086]

Where are the prices?

prices will be posted up when i get time.... ill update the whole thread soon with pics of coilover setup worked motor etc.. but till then just pm me.