4age small port loom

[keimeier]

Car - ke

motor - 4age smallport

use - skids

problem - do i have everything

personal situation - do i need anything more in order to start on the wiring?

i have:

smallport loom, map/vac sensor, coil & ignitor

all the other sensors on the motor such as manifold, knock, water temps, oil pressure etc i have and are sweet

cheers james:thumbup:

[Nikkojoe]

Air temp sensor? Found in the air box on ae92/93. Not needed to get running but needed for better fuel economy.

All the plugs for ecu? (ie 3rd ecu plug that is chopped and part of body harness)

[Skylar]

You need a wiring diagram to start wiring. Look at the diagram and see if you have all accessories/sensors on the engine/loom.

[keimeier]

not going to be doing it myself, slide86 is but just want to make sure i have everything.

nah dont have either air temp sensor or 3rd ecu plug by memory will check tomrorow. deff need 3rd plug?

cheers

[keimeier]

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs369.snc4/45213_488635658377_533003377_6949789_7744674_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs189.ash2/45213_488635668377_533003377_6949791_552854_n.jpg

any help?

[Skylar]

Yah, third plug is what what provides the ECU with power. You need it for sure.

It'll run without AIT but rich. Just get slide86 to wire it in near your filter. He knows what he's doing anyway.

[keimeier]

is it missing the 3rd plug or is that it jus not plugged in (last photo) ?

[Skylar]

No idea. It's your loom. Go try it out. Never worked with a smallport loom. I would think it's for sensors though.

[Nikkojoe]

None of them are on the loom on all 4age's, its on the body loom for a reason ;)

[keimeier]

no worries thanks guys will have a sus tomorrow.

any idea were to obtain one easily? try wreckers?

[Skylar]

Yeah, wreckers but go to a U-pull-it type as most wreckers won't separate a plug from a loom. Try a similar year Toyota.

[keimeier]

thanks for your help mate. let you know how i go

[blake.]

dont forget the o2 sensor. mine ran heaps rich without.

[keimeier]

missing 3rd ecu plug :( going to u-pull it tomorrow to see what i can find

[70FTW]

keimeier, this may help, ..3rd plug(12pin) & AIT

im doing conversion as well, great build thread btw:thumbup:

[keimeier]

cheers dude mad bloke :)) hopefully can find one tomorrow. good luck with your build

[slide86]

what is that 3rd plug on the loom then? it doesnt go into the ecu like you thought

[Matt]

3rd plug is for the cabin body loom... has all the stuff like Reverse lights, Oil temp, tacho, temperature and things to activate air con etc. If you get stuck for what is what on the wiring, pm me and i'll point you in the right direction.

[stahlz_ae86]

You need a plug from a 5S-FE camry from memory. But be careful as there's 2 different size 12 pin plugs. One is slightly wider can't remember if it's from a Vienta or something.

[keimeier]

all good boys. has to goto couple of wreckers but u-pull it elizabeth had way more stuff and found what i was looking for in a seca in bout five mins

cheers