4AGTE KE70. Microtech, W series box lot$$ spent! Needs work. ADL

[shuvke70]

1982 excellent condition body xx ke70
Next to no rust. has a 2 spots in entire car.

I am the 3rd owner of this car since new. Purchased from a grandpa. Been ridiculously well looked after. Still have the service history since factory somewhere.

Quick rundown
The car originally cost me $1800 stock
bigport tvis 4agte
NEW custom steampipe Kelway (ADL made) turbo manifold! just spent $700 on it
individual coil packs
brand new head, ported, polished, 3 valve angle grind job (has done less then 50kms on road since installed)
trust manifold, trust td05 turbo (rebuilt all new seals), trust Front Mount Intercooler
Custom Cooler Piping
trust external gate
custom turbo back straight through 3" with oval muffler at rear (stealth)
mictrotech lt10 + hand controller
350mm dish steering wheel (new)
trust gear knob
reco'd spooled t series diff
w58 supra gear box
puk clutch
jdm ae86 8kg coilovers + jdm brakes braided lines
cusco camber tops (new)
buddyparts 40mm rcas (new)
6kg 200mm OCS rear springs (new)
excel G rear shocks (new)
sound deadening removed interior painted hammertone black/ grey (looks mint)
full trim minus carpet (can be supplied to buyer)
vl in/ external fuel pumps, surge set up in boot
techno 14x8 - 11 and 14x7.5 - 4 may or may not come with car pending how much i get for it
majority of bushes replaced, super pro and nolathane
jap strut brace
t3 panhard rod
Brand New 53?mm twin core alloy radiator
JDM te72 quad headlights with gold xxx C badge

no rego, but have the papers here ready to go!

if left out heaps but they are the basics

now the bad.

currently not running. blows smoke as the bottom end needs a quick hone, rings and bearings and then it'll be mint! have also recently discovered the main reason for smoke is that the oil return line to turbo just needs to be straighted up for better flow.

suspesion is 90% complete not much left to do at all

needs a cut and polish

I have lost interest in the car. If I don't get what I'm asking simple. Wont sell it.

heres a link to everything thats been done.

http://www.ae86drivingclub.com.au/forums/showthread.php/1299-Shuv-s-4AGTE-ke71/page3

Price: $7,000 neg but no low ballers or time wasters PLEASE!
I have quiet easily spent well over twice of what I'm asking. I doubt you could build your own 4agte with a w series gear box with a microtech for what I'm asking for the car.

prefer a cash sale, but MAY possibly take an 'x'E7'x' wagon as part payment.

Located in the northern suburbs of Adelaide.

Contact PM or mobile 0434493776

Do NOT make my thread a place of discussion. Serious enquireys only.

Thanks

-Jarryd

http://www.ae86drivingclub.com.au/dcimages/5/6/8/22736.jpg

http://www.ae86drivingclub.com.au/dcimages/5/6/8/43358.jpg

http://www.ae86drivingclub.com.au/dcimages/5/6/8/20599.jpg

http://www.ae86drivingclub.com.au/dcimages/5/6/8/20600.jpg

just been rebuilt
http://www.ae86drivingclub.com.au/dcimages/5/6/8/32470.jpg

http://i48.photobucket.com/albums/f202/jarryd_t1/000_0062.jpg

[slide86]

i know this is a c**t act and i feel bad for it, but IF you part it out, there are some big $ parts im after.

someone buy it complete tho, it will be a monster of a car

[shuvke70]

160kws at the rears on a safe tune of about 15psi from memory.
if i get enough interest i'll part it out, but rather sell complete.

buddyparts is the reason this car is just sitting there.

i just wanna see it go to a good home. someone who has money/ time to get it going

[Hazkem]

Interested in swaps mate?

[R&D Mechanical]

aww such a good car! she must be fun as to drive! Hope it goes to a good home! good luck mnan

[shuvke70]

depends what your offering mate?

yea shes an animal on boost.

rather see her go to a good home guys. all reasonable offers considered

[4agte70]

You've come this far dude and your loosing big time to sell it for that. My brand new stainless HKS manifold cracked in about a million places on my old s13. Stainless sucks ass

[AJPS]

sucks to hear man!

I think you should keep it, seriously!

[shuvke70]

lost interest
kelway manifolds 400 - 450$
reco bottom ends $500 give or take
n shes drift ready.
like i said. dont get what im asking ill keep it
have my ae93 to play with so its not like im giving up corollas

bump

[Karllos]

+REP for the Kelway manifolds.

Excuse the spam, Reminds me of my old keto.. hope it gets finished by who ever owns it!

[shuvke70]

Kelway makes good shit from what I've seen so far.

Bumpskies

[shuvke70]

bumpskiis

[worked]

Is it driveable?? How bad is the bottom end??

[shuvke70]

can be driven but very smokey

needs no more then a
hone
rings
bearings
crank linish

not much work at all but im poor and lazy so it needs to go to a good home!

quick n proven set up. was Jay Ducas motor from his ae71

[R&D Mechanical]

I wonder why he sold the motor?

[James86]

sucks how much bad luck you've had with it but no one is buying cars at the moment. Keep it till you can afford to get it running properly then re evaluate whether you want to sell it or not AFTER you've done a skid in it :)

[shuvke70]

maybe he had a hunch shit was about to go wrong with it?

Kelway manifold is getting made as we speak. Only basic bottom end work to do now :)

Will take a neat/ tidy 'x'E7'x" wagoon as part payment. ta

[DC70]

can be driven but very smokey

needs no more then a
hone
rings
bearings
crank linish

not much work at all but im poor and lazy so it needs to go to a good home!

quick n proven set up. was Jay Ducas motor from his ae71

LOL what not much at all? oh yea just the dam pistons need to be removed from the block and while u at it may aswll redo bearings yea not much WTF what planet u live on

[Tim.duncan]

LOL what not much at all? oh yea just the dam pistons need to be removed from the block and while u at it may aswll redo bearings yea not much WTF what planet u live on

if you consider that allot of work then you should not buy this car!!

good luck with the sale, would be an awesome sleeper with the right set of wheels and a lawnbowls sticker!

[lolwat]

LOL what not much at all? oh yea just the dam pistons need to be removed from the block and while u at it may aswll redo bearings yea not much WTF what planet u live on
oviously have no clue

gl with sale looks tuff

[DC70]

oviously have no clue

gl with sale looks tuff

Yea no clue......how bout you head down to your nearest workshop and ask them how much it would cost to do the rings bearings a hone and crank linish and may aswell do pistons while you there.
what $100 by your calculations ???
Not everyone who is interested in cars like this is competens enough to redo piston rings and bearings like you.

[R&D Mechanical]

Which state are you from dc70? In sa we are all friends here and get work done cheapp

[DC70]

Im from SA too mate, well that would make sense then if u know someone who can do the work
always makes life easier dont it :thumbup:

[lolwat]

go to another shop im a mechanic that conflict of interest my friend

[DC70]

go to another shop im a mechanic that conflict of interest my friend

Everytime you write something you sound more and more like an idiot, are you an idiot? or just plain ignorant, think ur top #hit because your a mechanic eh, well u obviously arnt a lawer, knowing competitors prices is LEGAL, talking to each other to SET the prices is illegal, a conflict of interest is when you are personally involved with a case or client........i take it u must be intimate with the people in the other workshop then.

[shuvke70]

dont appreciate the shit slingin' DC70

don't agree with what written? then keep it to yourself.

I just spent $700 on a new custom made manifold. i know a mechanic who does a very cheap cash rate as he has all resources at home.
Not much left to do at all!

NEW PRICE!!! $6,800neg!

-velo seat. rest of car as is

0434493776

[Andy San]

Swaps for an ST185 GT4?

[shuvke70]

info? ^

keen on cash sale at this particular moment.
thanks

[shuvke70]

Pics of New Custom Kelway Manifold.

http://i48.photobucket.com/albums/f202/jarryd_t1/000_0049-1.jpg

http://i48.photobucket.com/albums/f202/jarryd_t1/000_0047-1.jpg

Bump

[joeschmo_57]

That manifold puts a bump in my pants.....

[AJPS]

looks sooo sick

glad that other POS manifold is gone!

[R&D Mechanical]

much better!

[Ramcam]

Hi there,just trying to help you with sale,You might want to check your oil return line from your turbo has a nice downhill path with no obstructions,especially when you have low mount manifolds.I had my newly rebuilt engine blowing smoke from oil not returning fast enough causing the turbo to leak oil into the dump pipe.When i changed my turbo set up to top mount with large oil return the smoke dissapeared.(i got told it was my rings as well)Hope my experience can help

[shift_rook]

that's a very good point! you've done a comp test?

[Ramcam]

Yes comp test was fine 155 psi(gze)

[shuvke70]

thanks guys. the manifold is a piece of work! quality > shitty bling.

ill have a sus of the return line. prob contributes a fair bit to the smoke i reckon. rings are tired but acl items are cheap enough. just dont have the time n money to spend on this beast to finish it off!

bump!

$6,800!

will start to part it out if i dont get any interest soon

[worked]

very interested in complete driveline if you part out!!

[AJPS]

buy the whole car ed!

[benzo]

It can't be parted. Someone buy my track car so I can finish this!

[worked]

i don't have the cash still setting myself up here in WA
i'd f*cking love to buy it tho, be mint to take it to SA and WA comps
lawson PM me need to buy some more stuff off you

[shuvke70]

would rather see this car go complete to benzo. its a proven set up. would be awesome to see it go to a new owner who has time/ appreciation for it. for the cost of rings, bearings, a quick hone she'll be back up to scratch.

No rush to sell.

bump

[shuvke70]

new pictures and added info made to 1st page/ post.

bumpskies

[macca1590]

all i can say is, FUCKING P PLATE RULES!!! if its still for sale in 10 months ill give you a yell haha

[shuvke70]

track it for 10 months.
and agreed... the new p plate rules are bull shit. even your n/a cars cant even be modified. just have to be extra sneaky now ;)

[shuvke70]

bump

neg on price.. but will be parting out soon if no ones keen on finishing my project

$7k neg
0434493776
Jarryd

[shuvke70]

express your interest in parts here

the majority of parts are listed on page 1.

thanks.

[dehney]

Price on the wheels ?

[JinxD]

interested in the W58 box, bell housing and front section of the tailshaft not fussed on clutch.
pm me a price when you decide to split etc.

[shuvke70]

offer me a price and ill get back to ya.

i have everything in my room to bebuild this bitch.

minus water pump and a possible head gasket ;)

[Andy San]

info? ^

keen on cash sale at this particular moment.
thanks

St185 GT4
more boost
fun on gravel :)

PM me if you actually want some proper specs

[shuvke70]

i have everything for the rebuild sitting in my room minus a head gasket.
once i get it running again i will reevaluating the price.

[shuvke70]

if your car is grey and has 4 spotties Andy I've seen it.

Wheels are for sale. 1k firm.

or 900 if i rip front tires off

[foamy]

What would you want for the brakes, hub, front end suspension setup?

[Futo_gt86]

Just before you part this out, I want you to know this is the car that made me decide that I want a 4AGTE KE70, and if I had the money right know I'd jump on it, but I'm a few months off that.

[RunFree86]

Mobile Number does not work mate!

[jmorley]

i would be keen on wheels and the quad front, such a clean car mate

[shuvke70]

i have a new mobile number. pm if you would like it

have a new motor coming that i will be giving a clean up (just the bottom end as the current headon the car is a spanker)

coilovers + front hubs brakes camber tops, braided brake lines $1100

prob around 3k for w series set up inc clutch

techno wheels are now sold

quad front end $400 if i deceide on parting out

i'll be keeping the velo seat.

$6.5k new price! alot of money + time has gone into this car!!

[addikt]

ura idiot dont part it!!!!!!!!

[shuvke70]

well someone should buy it! mint bodied car with all the fruit you could ask for really! street rego too!

[AJPS]

Do not part this car out!

[shuvke70]

Dave, there's more money to be had parting this car out. I'm really quiet fucking over it.

I'll throw in a complete bigport with SPARE ZE internals with new rings for the buyer if it goes for a respectable amount.

Someone make a cash offer PA - LEASEE!

BUMP

[shuvke70]

http://www.ae86drivingclub.com.au/dcimages/5/6/8/552350.jpg

[shuvke70]

6k take it away. No velo seat but I'll GIVE the buyer a spare 4age with 160,xxx kms on it in good working order. PM/ post your interest

[shuvke70]

bumpskies

[shuvke70]

soldskies

[benzo]

Finally! Good to hear Jarryd

[shuvke70]

Cheers mate. GL with yours too!

[benzo]

Parting mine out, I don't have your patience haha

[HOMEWORK]

Still for sale?

PM me

[Andy San]

I think the sold post about 3 above yours might mean it is sold

[Jacobxxx]

^^ This

Locked.