DOG the rolla hunter
25th October 2010, 10:32 PM
141581413814139up for sale is my ae71 sr20 powered streeter/drifter.i have spent thousands getting it to what it is but am unable to throw any more money at it due to other commitments.motor is s14 vvti non turbo,det gbox,custom shaft going to stock diff.front suspension is 86 struts,ajps 8kg springs,mr2 shocks,tein camber tops,cusco strut brace,jdm brakes,new brake lines,rona lca,monster kmac sway bar,whole front in nolathane.rear is kyb shocks,pedders springs,t3 panhard,19mm sway bar,all in nolathane.have cusco safety 21 full cage,have f series tarago diff with un molested centre,s13 brakes,and all the mounts have been swapped to suit by a diff specialist.the brakes need the calipers mounted or youy can run the tarago drums.trx rims,cd player 6=9's,spare stock diff. all the suspension done in the last 4 months so very fresh.
now the bad things....the car is not engineered,the motor has a noisey lifter that comes and goes,there is no interior in the car but i have new carpet and the rest of the interior if you want to put it back.the car could be engineered.it runs standard ecu and would pass an emission test easily.it has a cat.the roll cage has not had the holes drilled in the floor and mounted but is in there to make sure it was a good fit.
this car has 6 months rego but would be goiod for someone who wants to use it for the track as it is getting a bit much for the street.i have been pulled over 3 times for breath tests and shit and have had no dramas due to its standard appearance.the only hard part is rego time but a bodgy can be had for a hunj these days.body is rust free except for some bubbles of rust on the rear wheel arches which came factory.not in hurry to sell but cannot afford to finih it off properly. would even be good for someone with a stock car that wants to swap all the mechanicals into it.the car is mad to drive and couldnt possibly get any tighter without cracking the body.asking 7000$ and open to offers.i think its worth that in parts and you definitly could not pay someone that to build it.car is in sydney,penrith area,will not part out,comes with spares,esay project if you wanted to go sr20 det as it would bolt in.0415623285 or contact me on here. any questions let me know.please dont do that shit to me if you think my car is a shit box you all abuse me and it turns into a thread of negativity.but if the price is too much im open to offers that dont offend.:thumbup:sorry the cage is bolt in and can be removed easily within half an hour so doesnt look too hoony or atract the wrong attention on the street.car will be advetised else where as if its going to sell would not like it to be a lengthy process.
also has powersteer arms and spare cusco camber tops.
5500 for car without f series and cage,cage and diff will not be sold until car goes first.buyer has the option first.
now the bad things....the car is not engineered,the motor has a noisey lifter that comes and goes,there is no interior in the car but i have new carpet and the rest of the interior if you want to put it back.the car could be engineered.it runs standard ecu and would pass an emission test easily.it has a cat.the roll cage has not had the holes drilled in the floor and mounted but is in there to make sure it was a good fit.
this car has 6 months rego but would be goiod for someone who wants to use it for the track as it is getting a bit much for the street.i have been pulled over 3 times for breath tests and shit and have had no dramas due to its standard appearance.the only hard part is rego time but a bodgy can be had for a hunj these days.body is rust free except for some bubbles of rust on the rear wheel arches which came factory.not in hurry to sell but cannot afford to finih it off properly. would even be good for someone with a stock car that wants to swap all the mechanicals into it.the car is mad to drive and couldnt possibly get any tighter without cracking the body.asking 7000$ and open to offers.i think its worth that in parts and you definitly could not pay someone that to build it.car is in sydney,penrith area,will not part out,comes with spares,esay project if you wanted to go sr20 det as it would bolt in.0415623285 or contact me on here. any questions let me know.please dont do that shit to me if you think my car is a shit box you all abuse me and it turns into a thread of negativity.but if the price is too much im open to offers that dont offend.:thumbup:sorry the cage is bolt in and can be removed easily within half an hour so doesnt look too hoony or atract the wrong attention on the street.car will be advetised else where as if its going to sell would not like it to be a lengthy process.
also has powersteer arms and spare cusco camber tops.
5500 for car without f series and cage,cage and diff will not be sold until car goes first.buyer has the option first.