Quads for beams ( 20v or 3sge)

[DR86TY]

Hey all,

As stated im chasing a quads setup for my beams, looking for 20v quads and adapter plate with TPS.

Let me know if any of you bandits have them :)

Regards
Dave
0421 869 080

[Andy San]

PM Glenn (Celica RA45) he will have some

[DR86TY]

adapter is sweet ill grab one of glen, but still need quads with tps :)

[ke_70]

standed beams tps is the same as 20v.

[Celica RA45]

std beams tps is different you need the20v silver or black top tps to make it work

[ke_70]

aaaaaahhhhhhhh
mabey thats whats wrong with mine?

[Celica RA45]

have you been a tight arse and tried to use the altezza 1

[ke_70]

i didnt get one with my quads and the beams one looks the same as everyone elses i saw.
figred theyre the same. plugs into the loom to.

[Celica RA45]

you need 1 that finishes with either 80 or 90 in number on the side of tps ,thats what probaly been your problem on start up

[fantapants]

but the adap uses a learning function for the tps signal??? so it shouldnt really matter should it?

i i cant remember if i used the one of the beams or the one of the 20v, but if i fluked it thats great lol

[Celica RA45]

the 20v 1 s turn the other way im sure and the resistence is different as well as its moving smaller opening agianst bigger opening on the altezza

[DR86TY]

well the adaptronic loom as a 20v tps on it so ill need the 20v quads then ill be sweet. if any one has them i would like to them :)

[steroidchickens]

i am using beams one.

[fantapants]

yer i thought either you or me had the beams one :)