PDA

View Full Version : ae86,ae71,ke70 cambertops


john84ie
22nd November 2010, 11:25 PM
are these all interchangeable?i think i remember them bein different but not 100% sure??
Sam-Q
22nd November 2010, 11:31 PM
did you do a search?
john84ie
22nd November 2010, 11:33 PM
would be lying if i said yeah,should have..just seen some cheap cambertops so wanted quick answer,my bad!
ke_70
22nd November 2010, 11:43 PM
yep all interchangable.

although putting ae86 tops in a e7 will reduce castor
Nikkojoe
23rd November 2010, 04:19 AM
yep all interchangable.

although putting ae86 tops in a e7 will reduce castor

Sort of, depends on the brand. The ones I had in my gold 86 were styled like e7's, but the side effect was that camber could not get maxed out as much.
jakel
20th December 2010, 05:51 PM
how come ae86 strut brace will not fit?
KENut
20th December 2010, 06:09 PM
It will fit if you flip it around.
AJPS
20th December 2010, 08:05 PM
how come ae86 strut brace will not fit?

they definitely do
jakel
20th December 2010, 08:06 PM
true, maybe my T18 is different. Cause I bought one and it didn't fit.
Well it did fit into 2 of the holes other 1 didn't.
AJPS
20th December 2010, 09:49 PM
t18 S1 is different

you can get braces to suit

pm me
jakel
21st December 2010, 07:24 AM
Ah, thanks I just cut the other one so it had just the 2 bolt holes, was a cheap as one anyway. Also when I need to get camber tops I need to order one for my car can't use one from an ae86 or ke70.
AJPS
21st December 2010, 12:05 PM
thats right
anastasios
20th February 2012, 11:03 AM
If I want to use Cusco camber tops in my 71 and not lose castor, should I be buying the 116 410 A or the 116 410 FIA.

I have done some searching but could not come up with a clear answer.
ShowUsYourTints
15th March 2012, 08:39 PM
Instead of making a whole new thread, I'll just pop this in here.

I am about to install my AE86 struts, with XT130 LCAs, and I was just wondering if AE86 camber tops will fit the AE86 strut in a KE70?

Thanks gents,
Shazza
maxhag
16th March 2012, 03:02 AM
yep, will fit....
anastasios
20th April 2012, 01:19 PM
If I want to use Cusco camber tops in my 71 and not lose castor, should I be buying the 116 410 A or the 116 410 FIA.

I have done some searching but could not come up with a clear answer.

Does anyone have the answer to this?

Cusco show two part numbers for the AE86 as above. They also state for the late model TE71 to use 116 410 A. Now I have read that the TE71 has a different stud pattern to the AE71.

Just would like to know which ones to get so I dont lose castor!!
jakel
20th April 2012, 01:21 PM
TE corollas have a equilateral pattern ae/ke has one offset.