3sgteRA28
29th November 2010, 04:42 PM
Up for sale is a Gen III 3S-GTE (removed from 70,000km JDM ST205) that has been completely modified for RWD application.
This is a running setup and includes everything shown below. Note: You will need to supply your own ECU and loom.
GReddy TD05-16G Turbo
Tial F38 External Wastegate (38mm)
Custom Turbo Manifold and Dump Pipe
Custom Alloy Inlet Manifold
Custom Clutch and Alloy Flywheel (based off BEAMS design)
Custom Alloy Brackets for Cam Angle Sensors
Custom Alloy Starter Motor Bracket and Starter Motor
Custom Engine Mounts (to suit AE86 Crossmember)
Modified Cam Cover
Modified 3Y Bellhousing
Modified Rear Water Outlet and Radiator Pipe
Modified Sump and Oil Pickup
Modified Alternator Bracket
Adjustable Cam Pulleys
I will be pulling the engine apart and giving it thorough inspection, if something is wrong (ie. rings, head gasket, etc) it will be fixed prior to sale.
Location: Melbourne, but can organise freight.
Price: $2500 (or $3000 with a good condition W5# Gearbox - I believe it's a W58 but I want to double check the ratios before I sell it as one).
(Sump pictured is a modified 2S sump, sump with engine is a modified Gen III 3S sump.)
http://img513.imageshack.us/img513/623/img1472i.jpg
This is a running setup and includes everything shown below. Note: You will need to supply your own ECU and loom.
GReddy TD05-16G Turbo
Tial F38 External Wastegate (38mm)
Custom Turbo Manifold and Dump Pipe
Custom Alloy Inlet Manifold
Custom Clutch and Alloy Flywheel (based off BEAMS design)
Custom Alloy Brackets for Cam Angle Sensors
Custom Alloy Starter Motor Bracket and Starter Motor
Custom Engine Mounts (to suit AE86 Crossmember)
Modified Cam Cover
Modified 3Y Bellhousing
Modified Rear Water Outlet and Radiator Pipe
Modified Sump and Oil Pickup
Modified Alternator Bracket
Adjustable Cam Pulleys
I will be pulling the engine apart and giving it thorough inspection, if something is wrong (ie. rings, head gasket, etc) it will be fixed prior to sale.
Location: Melbourne, but can organise freight.
Price: $2500 (or $3000 with a good condition W5# Gearbox - I believe it's a W58 but I want to double check the ratios before I sell it as one).
(Sump pictured is a modified 2S sump, sump with engine is a modified Gen III 3S sump.)
http://img513.imageshack.us/img513/623/img1472i.jpg