archie1
6th January 2011, 10:37 PM
Car - Toyota AE86 Sprinter
motor - 4AGE
use - Street/Track
problem - Trying to Lcoate Anit-Rattle Shims/Pad Guides to Suit JDM Sprinter Rear Disc Setup
occurs/started when - Diff Came Without Brake Shims/Guides
personal situation (if applicable)- N/A
I have a JDM disc brake rear end (AE86) in my car which unfortunately came without the anti-rattle shims/pad guides on the rear disc brake setup. These are small bent up pieces of sheet metal which go around the ends of the brake pads where they locate in the caliper to make sure the pads fit in with minimum clearance and dont rattle. The pic attached may help.
Does anyone know where I might locate some or are they still available from Toyota? The local dealer is useless with this stuff.
All help appreciated.
regards
Andrew
motor - 4AGE
use - Street/Track
problem - Trying to Lcoate Anit-Rattle Shims/Pad Guides to Suit JDM Sprinter Rear Disc Setup
occurs/started when - Diff Came Without Brake Shims/Guides
personal situation (if applicable)- N/A
I have a JDM disc brake rear end (AE86) in my car which unfortunately came without the anti-rattle shims/pad guides on the rear disc brake setup. These are small bent up pieces of sheet metal which go around the ends of the brake pads where they locate in the caliper to make sure the pads fit in with minimum clearance and dont rattle. The pic attached may help.
Does anyone know where I might locate some or are they still available from Toyota? The local dealer is useless with this stuff.
All help appreciated.
regards
Andrew