alexthem0nk
19th March 2011, 07:56 AM
gday,
reluctantly going in a different direction with my ae86 and decided to sell the motor
put blanking plate with water bypass back of head, converted front water pipe to face radiator,
made up rwd thermostat housing front ae82 from back of water pump,
bought from import shop, drove about 20000km's then swapped for 4agze
$2000
located gold coast, SE QLD
contact alex on 0424 173 858
pulled it down and inspected condition
block and head decked
cylinders honed and block chemically cleaned
new piston rings and crank bigend bearings replaced
valves lapped and stem seals replaced
TRD .8mm MLS headgasket
fuel injectors ultrasonically cleaned
RWD intake plenum
RWD copy TRD exhaust extractors
RWD engine mounts and gearbox supports
flywheel and exedy sports tuff clutch
sensors and connectors with pigtails
stock ecu and loom/acc for extra $500 but would recommend going aftermarket
also have the t-50 gearbox i was gonna use with it for extra $500
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v.jpg
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v1.jpg
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v2.jpg
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v3.jpg
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v4.jpg
located gold coast, SE QLD
contact alex on 0424 173 858
reluctantly going in a different direction with my ae86 and decided to sell the motor
put blanking plate with water bypass back of head, converted front water pipe to face radiator,
made up rwd thermostat housing front ae82 from back of water pump,
bought from import shop, drove about 20000km's then swapped for 4agze
$2000
located gold coast, SE QLD
contact alex on 0424 173 858
pulled it down and inspected condition
block and head decked
cylinders honed and block chemically cleaned
new piston rings and crank bigend bearings replaced
valves lapped and stem seals replaced
TRD .8mm MLS headgasket
fuel injectors ultrasonically cleaned
RWD intake plenum
RWD copy TRD exhaust extractors
RWD engine mounts and gearbox supports
flywheel and exedy sports tuff clutch
sensors and connectors with pigtails
stock ecu and loom/acc for extra $500 but would recommend going aftermarket
also have the t-50 gearbox i was gonna use with it for extra $500
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v.jpg
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v1.jpg
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v2.jpg
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v3.jpg
http://i786.photobucket.com/albums/yy144/heebily_jeebily/20v4.jpg
located gold coast, SE QLD
contact alex on 0424 173 858