PDA

View Full Version : T50's, injectors (395cc and 440cc), rear quater glass, sc12 & sc14, 175mm nevo kit.



ae86 slide
31st March 2011, 09:19 PM
sup yall.

I am located on the gold coast, QLD and have these exceptional parts up for grabs.

*2x t50's (adm), wont post
*one was used in my car (still in car) and was ok, going back to third was a bit difficult at high revs but apart from that it was fine, was going to put good gear box oil in to improve the problem but never did. $200

*The other (pictured) was a spare and I have never used it. Was told it was fine and good to go, its as dirty as a shit rag. $200 BOTH SOLD

http://i565.photobucket.com/albums/ss100/ae86_slide/0ce7f585.jpg


*Std Ze red injectors (395cc) ran them in my ze with larger pulley and they were fine $80 SOLD

http://i565.photobucket.com/albums/ss100/ae86_slide/87a39ca6.jpg


*rear quater glass for ae86 (drivers and passenger side). $150 for both,$80 each

http://i565.photobucket.com/albums/ss100/ae86_slide/40b51d8f.jpg

*SC12 supercharger of my ze, never had a drama with this, as far as I can tell its in perfect condition. $150 SOLD
If anyone is interested I will have a full ae101 loom SOLD, ecu SOLD, all S/C mounting brackets, inlet manifold pretty much everything off an ae101 motor except the motor itself.

http://i565.photobucket.com/albums/ss100/ae86_slide/e425a379.jpg

*SC14 supercharger, was going to upgrade to this but grew balls and bought a turbo instead, if your balls are getting there but not yet fully grown, buy this and do ok skids, not hectic. Its the good SC14 with a large flat section at the front of the pulley which can be machined with more thread so the belt can sit further forward and can be fitted to an 4a easier. never used this but was told that someone bought and sold alot of sc14's until he found one good enough. $300

http://i565.photobucket.com/albums/ss100/ae86_slide/6c39cc72.jpg

*175mm nevo pulley kit, (super rare/awesome). Make your dirty stock ze do better skids. Be just like Grant Scott. So shinny your fans eyeballs may be damaged, need I say more?
brand new condition, comes with everything. pulley, tensioner (not pictured), belt, timing pointer and retro 60's tie died instructions and mounting washer. . $200

http://i565.photobucket.com/albums/ss100/ae86_slide/2b83c19e.jpg

*175mm crank pulley for 4agze, not alloy just a standard crank pulley off another car. I used it, its great, boosts a stock ze to 11-12 psi, comes painted awesome black with white timing marks stamped on it. (no pics, but I can get some) $100

buy all this shit and make your car awesome like all those jap drifting videos you watch and love making brain sex with.

Jase

Cerby86
31st March 2011, 10:27 PM
would you have a 4agze alternator mount?

ae86 slide
1st April 2011, 06:38 AM
Yes I would. got a pic of exactly what your after so I can compare it to what I have?

trikzlane
1st April 2011, 08:07 AM
hey man, ae101 ecu, how much?

ae86 slide
1st April 2011, 08:32 AM
hey man, ae101 ecu, how much?

$100...

trikzlane
1st April 2011, 08:50 AM
would you through the map sensor in. if so ill come get it this w/e

trikzlane
1st April 2011, 09:04 AM
turns out i dont need the map sensor, so ill take the ecu, your on GC right?, pm details and ill get it this w/e

Cerby86
1st April 2011, 11:12 AM
Yes I would. got a pic of exactly what your after so I can compare it to what I have?

well its just the bracket that bolts the alternator onto the motor, mine is a dodgy fabricated one and whoever did it made it at an angle so it chews belts to death lol.
I haven't actually got a picture but I tell you what if the price is right I will just buy the alternator and everything attached to it. Like the bottom mount, top slidey thing and alternator.
How much would you be after for that and would you have an idea on postage cost to taroona 7053?
Cheers
Mark

ps oh and while i'm thinking about it does anyone know if the ae101 map sensor is any different to an ae92 NA one? Like if i am running a charger will the NA map sensor have the range to understand whats going on?

ae86 slide
1st April 2011, 02:19 PM
My setup was a bit of a throw together monster created by Gilly. The lower bracket that I was on there is a factory toyota bracket but I'm not sure if it was a ze one, my alternator fitt and worked but had minimal adjustment range on it. I don't want to sell you something that your not happy with.

Cerby86
2nd April 2011, 12:06 AM
hahah really it can't be worse than what I have at the moment, I'll take a pic tomorrow! How would you be after for it?

ae86 slide
2nd April 2011, 07:40 AM
Like I said the bottom bracket is a factory part. The top swing arm was connected to the motor with a piece of right angle steel, I bought another piece of right angle that is thicker and looks to me like it would line up perfectly but never actually fitted it. Also the bottom bracket needs a washer put behind the rear mounting hole other wise the alternator doesn't sit straight on the belt. And finally the alternator sits about 10mm away from the sway bar when tensioned up with the right length belt.
Like I said it worked but not ideal. If your still after all that $70+post

ae86 slide
4th April 2011, 07:07 AM
70YvlaFQoe8

Bump, like those astronauts would have felt.

ae86 slide
5th April 2011, 06:44 PM
Ecu soldski

trikzlane
5th April 2011, 10:20 PM
hey man, will probs end up getting the nevo pulley kit off you in a couple of week, will let you know

ae86 slide
6th April 2011, 06:34 AM
Looks like it may be sold. But you never know until cash is in the hand. I'll update the thread if it does go.
I still have the other 175mm one. On closer inspection (I actually looked at it not just guessed) it is alloy. Anyway I'll get a pic of that up.

ae86 slide
6th April 2011, 06:36 AM
Not the best pic, I can get another one.

http://www.ae86drivingclub.com.au/dcimages/1/3/6/2/61673.jpg

ae86 slide
7th April 2011, 08:36 AM
R-1-62TcN70

ae86 slide
9th April 2011, 07:28 AM
everything is still for sale but ecu and loom.

trikzlane
9th April 2011, 02:12 PM
so the nevo pulley kit is myn?

ae86 slide
9th April 2011, 05:34 PM
All yours if you want it man.

ae86 slide
10th April 2011, 09:32 PM
Sc14 will be going on eBay soon. Someone save it from the clutches of an evil vn owner and slap it on your ze.

trikzlane
11th April 2011, 08:59 AM
lol^, yeah jase, im keen on the pulley kit, tho i wont be down that way for 2-3week so yeah

ae86 slide
11th April 2011, 03:47 PM
No worries man, I'd say it will still be here. If I get any other interest I'll let you know.

ae86 slide
14th April 2011, 08:17 AM
http://www.ae86drivingclub.com.au/dcimages/1/3/6/2/552155.jpg

ae86 slide
19th April 2011, 07:18 AM
Yeeeeah Boyyyy!

ae86 slide
26th April 2011, 06:49 PM
Bum with a p at the end

ae86 slide
30th April 2011, 08:10 AM
Ze injectors sold