s13 parts & random gear

[rjaayyx3]

Hey Guys have some things I want to sell

- S13 HSD HR Coilovers - $600 (8kg springs)

- S13 Lower Control Arms – $80

- S13 Knuckles – $40

- S13 Hubs - $ 40

- S13 Tie Rods and Tie Rod Ends -$50

- S13 SR20DET Callipers - $100 (with some pads & Brake lines)

- S13 SR20DET Rotors - $60

- S13 Engine Cross member - $50

- S13 sway bar - $20 (no links as they were screwed when I purchased them)

- R31 Castor Rods - $40

- TRX 15 inch Rims with about 75% thread (195/60/15) - $200

- DRiFT BOV - $40

- Fizz 907 Turbo Timer - $15

- Random Boost Gauge Mechanical - $20

- S13 Powersteering rack & lines etc.- $30

http://i680.photobucket.com/albums/vv170/rjaayyx3/fs%202k11/DSC_0003.jpghttp://i680.photobucket.com/albums/vv170/rjaayyx3/fs%202k11/DSC_0008.jpghttp://i680.photobucket.com/albums/vv170/rjaayyx3/fs%202k11/DSC_0007.jpghttp://i680.photobucket.com/albums/vv170/rjaayyx3/fs%202k11/DSC_0004.jpghttp://i680.photobucket.com/albums/vv170/rjaayyx3/fs%202k11/DSC_0006.jpghttp://i680.photobucket.com/albums/vv170/rjaayyx3/fs%202k11/DSC_0002.jpghttp://i680.photobucket.com/albums/vv170/rjaayyx3/fs%202k11/DSC_0005.jpghttp://i680.photobucket.com/albums/vv170/rjaayyx3/fs%202k11/DSC_0009.jpg

Will post at buyers expense

(also will get pics of other items as i haven't taken pictures of them yet)

LOCATED IN NSW

[foamy]

Hey Rjay, where abouts in NSW?

[rjaayyx3]

Western Sydney (Blacktown)

[foamy]

That's a good start for a S13 brake conversion, if this other deal falls through I'll send you a PM this weekend.

[adds]

Hi..., new to all this, but does the s13 lca's and tie rod ends fitt the ke70?.....how much longer are they to standard...if they bolt up i will l grab them this week end
Cheers

[foamy]

Have a read of this Adds:
http://www.ae86drivingclub.com.au/forums/showthread.php/208-s13-front-coilovers-into-86-*e7*

You can use the LCA's but you will need to redrill them if you want to use the S13 bolts (recommended). It's not to difficult, there's only 1 or 2mm difference between the AE86 and S13 holes.
It is a pretty straight forward conversion provided you have all the parts required.

[lolwat]

hey mate PM driftkid he mihgt been keen on those front coil overs

[rjaayyx3]

@ foamy
no worries mate
@adds
im not quite sure but im pretty sure you gain more steering locking and track when running a s13 front end
@ lolwat
cheers mate i sent him a pm

[adds]

Hi thanks

had a read and all i need to do is drill out the crossmember hold a bit bigger to suit the larger bolt on the s13 lca..can anyone confirm....and will the s13 tie rods have enough thread,
sorry if this has all been answered before

rjaayyx3 can you please PM me your number..

Cheers

[Pidgey]

Are coilovers just pair or set?

[jaysevu]

the coilys a pair or set?

[rjaayyx3]

pair only im negotiable though

[rjaayyx3]

lca and tie rod/ends sold.

[rjaayyx3]

prices drop on the
coilovers $500
hubs&knuckles $60
Sr20det Brake Setup $140

Im heaps negotiable if you purchase more then one item!

[BMXB]

Would the coilovers fit straight to ae86?

[rjaayyx3]

im pretty sure you need to swap out the hubs and brakes to fit them in.

come on guys need to get rid of these things so i can buy my injectors for my sr !

[rjaayyx3]

bumpbumpbump

[rjaayyx3]

coilovers sold
pending payment on sr brakes