handbrake tightening

[pet0r]

is there a way to tighten the handbrake CABLE itself in my KE? not talking about the adjuster in the drum itself.
any help would be appreciated.

[lolwat]

yes open your centre console, there will be 2 screws in there and another 2 infront of your console, remove console (makes life alot easier) and you will see the adjuster on the handle

[pet0r]

i've done that before and it doesn't turn either way...

[whatcamber]

Theres two 10mm nuts youll have to crack the top one and loosen it off. Then you can tighten the lower nut.

[lolwat]

yes as above, or you will have a black knob thingo and a nut undo the black thingo and tighten or loosen the 10 mm nut

[whatcamber]

Also dont go overboard, will only take a small adjustment to tighten up that cable. Count the clicks before it locks ( 4 - 6 is good )

[Sam-Q]

what you want is so that you start to have a little bit of drag with one click and none with it down. Check by adjusting it with the back off the ground. Or atleast that's how I do it