View Full Version : Tighe Cams for 16V
Vizz
5th May 2011, 06:23 AM
Have a used set of Ivan Tighe cams for 16V.
Edited: See reply for what I believe the specs are.
No longer going to use, asking what I paid, $300.
Located in Biloela QLD and will post.
Vizz
27th June 2011, 08:19 PM
My camera broke and it only took over a MONTH for insurance!
Anyway, here are some pictures:
Cam with drizzy drive gear. 1144C
http://img836.imageshack.us/img836/5581/27062011118.jpg
Cam with no dizzy drive gear. 1155C
http://img862.imageshack.us/img862/5758/27062011117.jpg
http://img402.imageshack.us/img402/487/27062011112.jpg
http://img850.imageshack.us/img850/8271/27062011110.jpg
What I believe they are:
Profile 1155c for Inlet
Duration 300 and .324"valve lift (8.3 in mm)
Profile 1144C for Exhaust:
Duration 288 and .302"valve Lift (7.7 in mm)
amaroo66
27th June 2011, 10:43 PM
PM Sent
Vizz
7th July 2011, 08:34 PM
Cams sold!
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.