AE86 Tacho modifications

[Andy San]

Does anyone have the link to the page which explained how to modify your circuit board in the tacho so it works with a microtech/haltech tacho signal wire?

I used to have the page saved, but it seems to have gone missing.

had all the step by step pictures and the explanation of all the parts required.

Cheers

[dr1ft-pig]

i would also like to find this

might have a dig on google

[dr1ft-pig]

2 mins and found

link to ae86dc tech article

http://www.ae86drivingclub.com.au/forums/showthread.php?p=34805#post34805

[Andy San]

cool thanks for that, my googleing found it as well. Tacho works now, yay!

[Medwin_3sGTE_AE86]

http://www.ae86drivingclub.com.au/forums/showthread.php?p=54150#post54150

[redsprinter]

hi guys ,

on my tacho everything works as normal without this mod. and i am running a mirco tech ...

will doing this mod give me a more accruate readout of speed and revs?

[Medwin_3sGTE_AE86]

hi guys ,

on my tacho everything works as normal without this mod. and i am running a mirco tech ...

will doing this mod give me a more accruate readout of speed and revs?

Hey mate

You must be running a distributor with a single coil setup, Yes?

This is more aimed at cars running direct fire setups, ie 4x coils instead of 1.

[redsprinter]

sorry for being brief.. my car is running a 4agze, that has been turbo'ed . using the
4agze DLI and cas.

im using a mirco tech lt10s. im interested in this mod if it will give me a more accruate reading as im running a w58 gearbox + 4.1 final ratio and 195/50/r15s . im pretty sure my tacho is out of wack .

[Medwin_3sGTE_AE86]

Depending on how you've wired the tacho up, will affect its reading.

I think you mean you think your SPEEDO is out..... Which the tacho has nothing to do with....