what to do when missing bolts

[evil86]

hey guy, im doing some conversions at the moment and realised im missing alot of bolt as the seller did not provide them for me. im missing gearbox bolts, rear caliper bolts and s13 conversion bolts.

any idea or recommendation?




thanks for reading

[dave2221]

Option 1:

cable ties

Option 2:

a place like southern fasteners..... take the bolts your missing they will tell you what they are (prob metric fine) and then you buy them.

[dave2221]

option 3:

liquid nails.

[Sprinter86]

head down to pick-a-part and grab lots of bolts off the same parts on similar cars.
ie. if you need nissan bolts, maybe grab some off a gazelle CA20? or similar.

this means you usually get the right size, length and thread bolts/nuts.

thats what i would do

[n00bvak]

contact the seller first of all and ask him for them.

if not, your friendly jap importer should be able to hook you up with the caliper and s13 conversion bolts.

as for gearbox, if you can get one off a mate or someone here and go to your local fastener company and get copies!!! They are called coventrys/sweetmans in WA

**dave2221 beat me too it :P

[Jonny Rochester]

Toyota bolts:
M6x1
M8x1.25
M10x1.25
M12x1.25

Wheel nuts:
M12x1.5

Seat belts:
a special thread, not metric


You can buy hi-ten metric bolts in packets from SuperCheap and places like that. Any place with a Champion bolt display. But it's not cheap. And often a M8 bolt with a 12mm head, will end up having a 13mm head when you buy it localy.

[Hokey]

i hate having 13mm bolts in my car :(

[evil86]

problem is that i bought engine of one guy and gearbox off another... so how do i get the bolts to mount the gearbox to the motor

[Hen may possibly be a nut]

Agree with Sprinter86.

1 - Go to Pick-a-part.
2 - Pillage bolts from everything within sight (ok, keep it to toyota/jap stuff so you know it's metric)
3 - ???
4 - Profit

Hen

[n00bvak]

all 4age-gearbox bolts are the same from model to model i am pretty sure as the bellhousings are the same.

[Jonny Rochester]

gearbox bolts:
M12x1.25

2 of them are 75mm long
2 of them are 55mm long

[markiitourerv]

I wouldn't bother trying to get bolts from a normal wrecking yard, most would tell you to fuck off.

Use the specs above and pillage u pull it, fill your toolbox with 'em, and buy 1 pedal rubber.

[Clinton]

a gearshifter boot is also a good one to buy

[hugh]

I wouldn't bother trying to get bolts from a normal wrecking yard, most would tell you to fuck off.

Use the specs above and pillage u pull it, fill your toolbox with 'em, and buy 1 pedal rubber.

That's if you tell them..