Cork Nose's Dirty Keto.

[corknose]

Well this is my car, i recently bought it off gunmetalgrey70 and yeh this it is,
specs:
driveline

[list]
4age 16v bigport

all new sparkplugs and leads.

t50 gearbox with shortshift kit

s series open diff/ s series tailshaft

brand new 2.25" custom exhaust system with twin kickups

oilcooler

large radiator and thermo fan



susspension

front

trd fully adjustable coilovers

rollcentre adjusters

sprinter brakes with slotted roters

new brake lines

cusco cambertops

struit brace

rear

bilstein shocks

xr8 springs

exterior

car just got a fully profesional gunmetal gray spray job 4 weeks ago, looks very neat.

madhouse front lip.

15x8 sportmax wheels and bridgestone potenzza tyres all have 99% tread (all brand new.)

arial antenna hole was shaved in sprayjob.

guards have been slightly flaired to fit wheels.

interrior

passenger and drivers seats are both matching brand new reclinable bucket seats, unsure of brand.

new black carpet

various parts of interrior have been sprayed black

deep dish just jap steering wheel + boss kit

kenwood headunit, pair of alpine 6x9s running through a coustic amp.

short shift kit.

tacho dash

before i got full service of steering rack,wheelbearings allround,new drums on rear new bushes and new diff seals,,
me think it is a bit wider as i cant fit my fingers under my gaurds anymore.
http://www.ae86drivingclub.com.au/dcimages/8/6/6/8017.jpg

http://www.ae86drivingclub.com.au/dcimages/8/6/6/8018.jpg

http://www.ae86drivingclub.com.au/dcimages/8/6/6/8019.jpg

http://www.ae86drivingclub.com.au/dcimages/8/6/6/8020.jpg

http://www.ae86drivingclub.com.au/dcimages/8/6/6/8021.jpg

http://www.ae86drivingclub.com.au/dcimages/8/6/6/8022.jpg

and the driving instructor
http://www.ae86drivingclub.com.au/dcimages/8/6/6/8023.jpg


plans are quads lights, some aircon as it is my daily, t18 bars, ajustable lcas or sigma/xt130 , stage 2 cams and t seiris diff with a lsd for the skids,

if u can recomend any im open

[shift_rook]

sweet buy mate, looks decent

[Water Boy]

Yeah this was a good buy and credits to previous owner! Your plans sound wicked too :D

[corknose]

i also have some fender mirrorss sshould i put them on?

[svenmate]

up to you man, everyone has their own styling.

most fender mirrors require you to drill holes in the body so def give it a good thought before you do it.

looks tough tho
wicked daily!!

[AE86R]

NOOOOO fender mirrors the thing looks phatt

[corknose]

yeh went for a drive today and it was rubbing on thyres so much so i got trolley pole and and pulled em out a bit but it was just like a bog gau so chiipped the paint and took a chuck out,, at least i can justfit one finger under

[ke_70]

thing looks dope i wouldnt put on fender mirrors on though but up 2 u more pics to almost background spec

[corknose]

yeh i just had a look at the gaurds and they are just bog grrrr so anyone know how i should pump them a bit?

[ke_70]

how much did u pay 4 this if u dont mind me askin

[corknose]

7 a bit too much but my old man likes it cause theres almost no work to be done

[corknose]

can anybody help me witht his my tyres are rubbing like hell so i got a trolley pole out and rolled them a bit and i hear a crack and the gaurds are missing a chunck so i give it a fell and its kinda like it rusted out and then they boged it before paint so nowi got a chunk missing either side and a big crack anyone suggest anything im thinking just fuck the paint and do what i have to

[corknose]

yeh i was driving down the road with my bro and i see this guy backking out of the driveway and im thinking hes getting quite close and then bang and i just felt like crying ay my stomach just like sunk,,and he was like yeh sorry didnt see it and hit but heres my details and i was like yeh thanks n then the guy who live acrross the road comes out acting like a prick and yeh ,,ill post some pics up

http://www.ae86drivingclub.com.au/dcimages/8/6/6/10626.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/10627.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/10628.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/10629.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/10630.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/10631.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/10632.jpg

cant really last photo but it put a crack down the front quater and theres a nice crease in the bonnet

[dave2221]

insurance
new quater panel and new bonet and brand new headlights for you to sell wehn you get your quad lights in

[corknose]

yeh got my quads so im thinking just ned quater panel and paint and let the guy off with just that ,,,,any1 have a quater panel for me?

[Clinton]

dont pay any more than $30 for 1 guard. most guys like to sell guards in sets though. a pretty good price is $50 for 2 guards.

with your paint cracking on your rears just try save all the pieces then alredite them in or you could run a smaller tyre for most hektick skidz

[ke70astro]

much effort getting the old wireless out an puting
the head unit up there?

[corknose]

u talking bout the head deck?

[ke70astro]

yeah!

[corknose]

astro:im not too sure as i didnt do it but i have done it in other cars and itsnot a problem
AJPS:yeh thanks heaps looks smick,,stupid fucking step mum threw the stickers out make her buy some more,,can i buy more?

[corknose]

not really update but yeh
http://www.ae86drivingclub.com.au/dcimages/8/6/6/11357.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/11358.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/11359.jpg

this is my full lock it scrubbs on the inner gaurd how can i get more with out the scrubbing can i cut the inner of the wheel well
http://www.ae86drivingclub.com.au/dcimages/8/6/6/11360.jpg

[corknose]

ohk thats great i think i might have to get something offf you soon aswell

[Clinton]

take the plastic inner guard out

[corknose]

Already done that it's hitting like near the pedals if understand that

[R&D Mechanical]

looks like you need some more offset son. maybe some spacers? or better fitting wheels :)

[corknose]

Yeh I'm with you on that makes sence will may e get some 10 mm spacers,, also what type if resinater to set up lights

[Clinton]

xt130 LCA from AJPS.

your front shocks will be rooted man...

get someone to cut the sleeves off it and weld them onto standard 86 struts with new shocks.

[corknose]

Already got coils in the front but yeh I will get some from them how much Are they

[Clinton]

the coilovers have been cut and shut too low for the shock. trust me. your shocks will be raped

[corknose]

Okk they don't seem to have any problems atm

[OMG866]

clint talks POO :) if u have any problem jsut replace the shocks. keep everything else. trust me. take it from me i am the first to own them since arrival in AUS

GL

[jay70]

Already done that it's hitting like near the pedals if understand that

by the sounds of this it sounds like you need more positive caster, spacers will make it worse

[pen15]

pics of dicks and just replace your shocks with some kybs if the trd blues are rooted

[corknose]

some fags did this sorry bout the photo quality

http://www.ae86drivingclub.com.au/dcimages/8/6/6/12866.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/12867.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/12868.jpg

many more but can see in the pics

so i need new paint so im thinking of going either

http://www.ae86drivingclub.com.au/dcimages/8/6/6/12869.jpg

http://www.ae86drivingclub.com.au/dcimages/8/6/6/12870.jpg

http://www.ae86drivingclub.com.au/dcimages/8/6/6/12871.jpg
or that last one but gloss and maybe a bit darker

tell me what u think

[jay70]

dude its just an e7, hit it with some spray cans

[corknose]

nah i want it to look kinda half decent

[jay70]

so why do you call it dirty keto?

[corknose]

its got that sicker on the back light it came like that so

[OMG866]

really consider parking it some where else. have u got a shed or garage. that is fucking terrible,

[corknose]

man there has been all this damage and ive done non(except gaurds wich im just getting bolt ons if anyone knows where and how much?)yeh got gargae but parents cars get it so i jus bring it down the drive everynight now

(ps, whos this OMG866?) guessing u helped kurt aswell/?

[OMG866]

did not really help him build it. im good frineds with Pen15. i met you once at sylvania maccus before a 86dc cruise a while back. jsut put your car in the garage man. like there are so many whizzel MOtherfuckers out there that have something against E70, E71 hachi's anything old and toyota. i had a few problems like that with my old sprinter. but those dicks man are fucked. i would hunt the person that did that down. Yes your car can be easy fixxed etc. But the thing is YOU JUST DONT DO THAT SHIT TO OTHER PEOPLES CARS.. anyway ill leave it to u..

Gl Mate

[corknose]

yeh i rember u now,,had it down at my old mans factory for 2 weeks brang it home to wash it and then this happens i was just like wtf

[Clinton]

pussy. just drive it harder. you wont care. or get a pink excel. i heard they are faster the a 4age 16v. mine is. i get moar sideways in it too than the 86...

[corknose]

i wouldnt reallyt mind it was a scratch but it like dicks like 5 of them! bout 400mm big

[45KIDS]

Keep it clean! And the maroon/chocolate brown colour.

It will look hot aye

[Clinton]

its just a dick. seriously get over it. everyone has dicks. you have 5 on your car. girls love dicks. so your car is a chick magnet. go drive it to kings cross and see how many hookers come out and si on your car. i dont see what your problem is...

[sundee]

i rate the colour of the 1st 70 u pictured!..looks nice but man wheels do make that car look hott!.. man i want a some good offset wattans!! awsome what wrong with the colour of your 70? looks alright except where those tools scratched it up

[Beau]

Do people really have a issue with e7s and 86s in the shire???

sucks about the damage but just grab some light grade sandpaper and wax that shit. She'll disapear a lil

[starni_boy]

At least they had humour about keying it.

[corknose]

i didnt think that people hated them cause every1s always like zomg a fully sixk corolla so i think they were probs like yeh lets fully scratch it up ahaha

[Beau]

dam it i thought there was a group of ppl i could annoy just by the sight of my slut of a 86

[corknose]

i think everyone would just like omg them self to death if they saw your car in cronulla theyd just like explod

[Beau]

i think everyone would just like omg them self to death if they saw your car in cronulla theyd just like explod

I doubt it. its a whore of thing. Plus i dont have a southern cross sticker on my car

good luck with your build!

[callum]

i love a gummetal ke.
i cant belive someone would actually do that to your car.
there must have been some hate.
thank god i dont live in the city.

[Clinton]

lol. bangalow.... where all the shops close at 6pm....


dude with the bolt on flares. you just weld that inner lip to the body. or be dero as and fibreglass it. i wouldnt use bolt ons unless i was running some decent wheels but man. just get a chain. loop it around a street sign away from your house and attach it to your car. then get it home. put a stockie on the back and cut the street pole down to sorta like 75cm or so. borrow mum's hair dryer and pump those guards out abit. just give it a try man. if you dont like it just buy bolt ons. metal guards look win and you'll get all the shire gamin as bitches on yo' dick.

[corknose]

soeakingg of more ke haterid in the shire just saw 2 people on thumpstars throw bunggers at my windows trying to smash them i think, asuming it was them who scratched it and i think i know them so ill be paying them a visit!!

[callum]

lol. bangalow.... where all the shops close at 6pm....

everything now closes at 8.30
my car would be in tact though, if i owned one

[pen15]

soeakingg of more ke haterid in the shire just saw 2 people on thumpstars throw bunggers at my windows trying to smash them i think, asuming it was them who scratched it and i think i know them so ill be paying them a visit!!

where do they live? ill come with and btw don't listen to Clinton he cant drive for shit do with your car what u want to do not what people tell u do the research and build it and have it look the way u want its ur car isn't it

[corknose]

not sure where there live but i always see em riding around, yeh nah i have kinda relised that people on here(cant say i dont do it) try n tell u how to do it to their likings

[luke641]

Ay Calum...

Man your cars clean..... you catch who did the scratches on your car??? Im not even going to drive mine to school(would be stupid considering im like 200m away) but yer... there are some real ***** out there.... My mates rx7 got the same scratch treatment as yours in the mall...

Keep up the good work on the ketoo but.... If u need a hand with shit let us no

[350hp4agte]

man car looked mint sorry here about the dicks

[corknose]

yeh another ke the green and black one got the dicks in it too.. what car u get luke? people would smash yours if u took it to school, yeh kinda getting over the dicks now just gotta get few things done then its going in for paint.

cheers callum.

[pen15]

did the green 1 get the dicks too fuck i don't wanna take mine out anymore if its gonna get dicks carved into it id kill the cunts ay

[Clinton]

like how you were going to kill the wog from blacktown who rode a pushie to miranda fair from blacktown and was going to steal the vs commodore mat?

[corknose]

Haha that is all.

[pen15]

your a funny guy clint but i drive a vr commie and if i meet ur wog friend i will brake his nose and that's not a joke

[corknose]

hey matt, when im like going slowley sounds like theres a tinkling nnoise in the engine bay you got any clue?

[luke641]

Havnt Got one yet:(

Thinking AE86..... Any one no any... Ill be looking to buy around september... Have about 6k.....

And there not that bad to me any more ahhahaha

But so many cars are gettin f-ed over at skoool

[corknose]

buy dave project one

[dion_jay]

clinton is one funny fukin cunt

sorry to hear bout your car , had it done to mine a few years ago but i got a bottle of milk thrown at it to ... stained all the paint

just see the good side of thing , no u will get it resprayed and u prob wuld av neva dun that before that shit

[corknose]

its got a new paint job about 6months old now

[dion_jay]

yeah but now u ccan have the color u want lol

[Clinton]

did you get cut much when they threw a bottle of milk at your car?

[corknose]

i didnt mind it but yeh would of liked to keep my money n not paint it, what u guys think 2pac purple and paint the mirrow bumpers grill everything? no point in doing it in acrylic

[ke_70_blue]

mate nice car .hope u get hold of the ppl who dicked ur car .
a real dark puple would be real nice as well

[corknose]

http://www.ae86drivingclub.com.au/dcimages/8/6/6/547105.jpg

bit of a teaser

[sundee]

i didnt mind it but yeh would of liked to keep my money n not paint it, what u guys think 2pac purple and paint the mirrow bumpers grill everything? no point in doing it in acrylic

i think colour coded bumpers belong on excel's or on bodykits.. u need something their to break up the colour.. stay chrome bumpers.. or no bumpers.. purple could look cool... phototshop sample??

[corknose]

it was a joke i was paying out that dion jay guy lol

im going to go like a pretty much black with dark blue in it or like a browny marron and dicinding on weather to paint my bumpers

[tysonke70]

wats the colour of teh red ke in teh pics on teh previous page
??

[starni_boy]

wats the colour of teh red ke in teh pics on teh previous page
??

It's red.
You passed kindergarten on naming colours correctly.
You failed kindergarten on spelling.
It's okay, Billy Madison.

But really, its starting to look good!

[green_boy_91]

all it needs is pink wheels now lol

[corknose]

hah yeh i was just browsing and found this
http://www.ae86drivingclub.com.au/dcimages/1/1/1/9/15014.jpg[/

[dion_jay]

did you get cut much when they threw a bottle of milk at your car?

no did you get a hard on when you realised you have a cunt between your legs

[corknose]

was his missus was sitting on him or something? gtfo of my thread

[dion_jay]

im back...

[corknose]

well i was having some problems with the car and found out there was a valve missing from the fuel injectors for the vaccum,

The starter motor was on its way out since i had got it,

The driveshaft cover had broken off since i got it never knew what the noise was,

The diff is crunchy as and the seals are leaking

The rings are gone in the motor so lookig at doing rebuild after paint ,

Found some rust in the fuel filler and in the rear arches

seems like i paid too much and got a dud

[pen15]

hows the car dood i haven't seen this thread updated in a while

[corknose]

^^ as u can see above not going very well seems as i had too spend another 1200 to get new steering rack new bushes new drums and a couple of other things n now this

[pen15]

wow dood so whats going on are u pulling her of the road for a little?

[OMG866]

what 1200 bucks. wtf did u need all that replaced for???

[corknose]

I had to get the bearing fixed too it was pretty rooted, I will probs get it painted and rust cut out and rego n rebuild motor port it shave the head differnt cams give a bit of work any hints on where to get parts and what rotation and lift?

[ke70astro]

when you put the tacho dash in.
howd you make the digital clock work?

[corknose]

not sure got it in the car would probs just power from the battery

[Prewer]

when you put the tacho dash in.
howd you make the digital clock work?

When i converted mine from auto to manual (had a clock dash previously) and installed the tacho dash, as soon as i connected the battery leads it worked, didnt have to do a thing, only plug in the three or four plugs behind the cluster ;)

[ke70astro]

yeah true.
well mine doesn't seem to work
I got given a 71 with it in it
because they lost the key for it,
so maybe it stoped working in it.
have to take it out an have a good
look at the back.
thanks anyway.

[pen15]

hey cal i heard you found the bloke who keyed your car have u fucked him up yet?

[corknose]

hey man nah, someone kicked his car in so he probs thinks that was me, but im not sure like if he gets smashed he might fuck my car even harder, i dunno kurt wants to smash him and a couple of my older mates too, he pulled up next to me the pther day and was looking down the side of my car to see if was still scratched.

anyways i got a jdm diff for it 4.3 ratio 2 way trd, kinda moved my interia around a bit will get some pics. n then im just gotta do some body work then off for paint.

[corknose]

oh yeah someone tried to steal my wheels only got 3 nuts off it,
u get my message yesterday mat?

[Ke70alex]

Man, iv been reading this thread and it made me really fuckn annoyed. PARK YOUR CAR IN A GARAGE!!!!!! its too nice!! nothing has happened to my ke but iv had shit doen to my kingswood (brake fluid all over the bonnet and front end, fucking the paint.. a dent was kicked into it). so yeah bro, fuck it kills me to see a car like yous fuckd up

[bams_keto]

how'd u go with your car? did u find the wheel nuts

[corknose]

yeh found 3 at the end of the street no real dramas just crushed the lca a bit and bit of gaurd damage so if anyone has any ke front gaurds i need desperatly

[sundee]

hey dude ive sent u a few pm's, just need to know if u want to grab anything , if u have no idea what im talking about PM me and ill explain.

[corknose]

Yeh I got the pm. I would like alot of stuff but have no moneys so I'll have to say pass thanks for the consideration

[sundee]

hehe NP man just need to know if your in or out.
cheers

[Rhys.]

you still have my dirty keto sticker on there from when i owned it haha,

didnt realise kurt did a bog job on the gaurds though, should have bought a trusty red 86 ;)

[corknose]

haha sometimes i wish i did, ah well. bit of an update got a new trd 2way lsd 4.3 ratio, n some mk3 14x9 -25 for the rear n mk3 14x9 -12 for the front,just welded some gaurds on this arvo should have pics by monday or sunday,

[sundee]

heck yess! pic's of wheels and fitment!!!
especially the 14 x 9 -25... i want to go 15 x 10 - 26 but im not sure how much guard work its gonna need as i cant find pics anywhere!!

it will look epic with those wheels!!!!

[corknose]

yeh im not sure how well they will fit but just a stock ke front gaurd wleded on the back with 9 -25 running 185/60 is like nice fitment not too close. so maybe if u pump them?

[ke_70]

pics! interesting how the 9s go on the front

[corknose]

8 -12 on the front, left my phone at hungry jacks but my mate has it so maybe later tonight or tomorrow iwll have pics.

[ke_70]

ah that make more sence y did i think 9???

[R&D Mechanical]

this thread needs pics:)

[corknose]

agreed ahhh stupid me leaving my phone places!!!

[driftke70]

if i knew who keyed my car, shit would hit the fan.

good to see someone responsible, but dont be a pansy, teach the dude a fucking lesson.

[corknose]

nah man, im not gunna do anything cause he doesnt think like that hes stupid, some how word will get around n hell be angry n if i fix up my car he will wreck it so ill just leave it at that, he knows i knew he did it never said anything to me so im just gunna leave it n if it happens again, i might have to start taking action.

[dave2221]

if he does it again leave a note on his windscreen with some stern words on it...

stuff like disappointed, and degenerate....

[corknose]

http://www.ae86drivingclub.com.au/dcimages/8/6/6/547602.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/24141.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/24142.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/24143.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/24144.jpg

i got lazy and cbf bogging the gaurd up for now so one day when i have more sleep i will.

[jay70]

nice wheels man. maybe get some longer lca's to even up the track

[ROLL3R]

If you flared that front guard a little sigma LCA's would give a nice tyre tuck effect and fill the guards.

[corknose]

if i went any it would be xt130 or adj ones, sigma is a bit too crazy

[ke_70]

go sigma unless your worried about tyre life
crazy camber for crazy wheels

ronas arnt really worth it cant even notice a difference

oh and sik wheels too and r those front guards?

[ROLL3R]

Because you have Camber tops Sigma LCA's would increase your track by 30mm and give you huge adjustment camber wise. The Xt130 LCA's would only increase your track by 10mm. Do some measurements and find out how much room you have under your front guard. Also If you want a pair of XT130/Sigma LCA's PM me.

[R&D Mechanical]

i have sigma arms in my wagon with camber tops to make it not too silly

[Rhys.]

who did the welding? i have to do similiar to the 86

[ae86]

do not go sigma... xt130 at max, but may cause more troubles to fit wheels due to more track i ended up fitting em under with stock 86 arms and full neg camber on cusco camber tops, just make sure guards are done, i miss these wheels FK.

[OMG866]

those wheels are dope i cant wait to see it at pizza Night. get ur ps already ;)

[corknose]

yeh rhys i did the welding its super easy.

[starni_boy]

Yeah, quite an easy mod if you know what you're doing.

Looks epic with wheels yo.

[corknose]

like i had no real clue what to do but a good thing to do is(what i did).

i used sach clamps hold it in position and tack around the clamps and while it was hot with a pannel beating hammer with a point so its hard against the body then do a half inch or inch of weld and while still hot tap with the hammer etc etc.

i knew there was gunna be alot of bog in the left rear quater but when i had to grind back to the metal i was suprised how much lol.

[Rhys.]

yeh i can stick weld, im shotty at mig welding though. Plus i dont have a welder :/ wait till you see my gaurds nothing can fix them.

[VTAZ!]

i saw ur guard at oran park drift prastice day OMG your right LOl

[corknose]

Haha I remeber when u first did them before the cruise, if ur getting bigger wheels weld some one but if not leave them , like 14x9 - 25 isn't even close to the gaurds.

[Rhys.]

i saw ur guard at oran park drift prastice day OMG your right LOl

hahaha yeh thats when i didn't own it, never mind i did the impossible and fixed it all today they look like new ;)

[Rhys.]

when are we going for a drive callum

[starni_boy]

Saw this just then.
Although night time, looked pretty sweet.

[corknose]

you did? rhys come to toyfest sunday fuck park life if ur going.

[starni_boy]

yeah man, you were parked at pen15's house.
Fuck toyofest, go parklife if you got a ticket!

[biggo]

this thread needs more pictures!

[dunga70]

go corona arms.. sigmas r stupid unless u like killing tyres in 4 months.

[OMG866]

Just a pic of corks car before toy fest lol

[corknose]

hahaha whats with the hotdog?

[sundee]

this thread needs more pictures!


Just a pic of corks car before toy fest lol

i dont think u understood. so ill say it again.. MORE PICS MORE PICS MORE PICS!! please :)

[corknose]

this weekend homie, its getting painted so illg et some better ones then.

[marvis]

Lower :)

[corknose]

yeh i know not tucking an tyre really in the rear, who wants to cop the rear lower for me?matt?

[jay70]

yeh i know not tucking an tyre really in the rear
and the front

[corknose]

the front not tucking i dont think but the rear is a bit like just the thread

[corknose]

its tucking the tread in the rear and the fornt isnt i dont think

[corknose]

so i decided to paint my car in primer colour as it was mostly painted already it was pretty rough but i dont really car cause its probs just gunna get fucked again. i need to put my rear bar on too.

http://www.ae86drivingclub.com.au/dcimages/8/6/6/25864.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/25865.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/25866.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/25867.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/25868.jpg

[jay70]

eww. why is it so high

[corknose]

cause i dont have an angle grinder its not that high when u see it in real life and if u have a look i took all those picks from down low

[jay70]

you have coilovers in the front dont you? just drop it

[corknose]

yeh but then the back will be in the air so ill wait till i chop the rears.

[bams_keto]

u need to do something quick smart cal coz that thing is a 4wd spec atm
just go around to mats next weekend and cut that shit!

[corknose]

yeh i wanted to this weekend but i didnt know if he had one or not but next w/e we will drop this shizzz

[starni_boy]

I have an angle grinder I'll let you borrow?

[corknose]

i have got one i can use but i dont know how much to cut off ect.

[bams_keto]

show them cal!

[corknose]

pics now? or morning?

[bams_keto]

something

[corknose]

lowered it a bit can just fit 3 credit cards on the rear with front gaurds welded on, pretty nice for a daily. :)


http://www.ae86drivingclub.com.au/dcimages/8/6/6/26422.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/26423.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/26424.jpg

[corknose]

Yeh we though the front was too low but when we got it out on the street it was the other way around

[jay70]

how does the handling feel with so much rear track?

[corknose]

Pretty good, I'm going to get some corona lca soon when I get the moola and get some Moore up front. It's a bit bouncy but meh it loves it will probs wind coils down for annual

[OMG866]

looks phat :)

[corknose]

yeh u give jase your struts?

[pen15]

epic racing/hoops last night you car goes nutz cal

u should have told steve to gtfo and you should have had a go it was heaps fun lol

[corknose]

i recon ill hit something, hell devoes not gunna rain tonight what u doing

[pen15]

relaxing at home for the moment im sick as a dog and i got work tmoz so ill give the rolla a rest till annual

[corknose]

haha the show car, wb sat night?

[Clinton]

why isnt it raining?

[corknose]

cause its gay n likes men. tmorrow night and sunday should be but.

[OMG866]

yea jase did my struts today. just put the rears in and waiting for jase to give me the fronts :(

[sundee]

rear fitment and height is epic! just need wider or more offset up front and lower and your rig will be to drool over!

[corknose]

yeh getting xt130 arms soo or adjustable, so ill have more take make it look more normal.

[sundee]

give me a holla if u wanna go down the adj route...

[corknose]

i dont know what they are but they are about 4-5kg and they barley rub only on huge potholes

[bams_keto]

i think matt mead has falling for your car cal,
He does some good work with the carmera tho.

can't wait to see drews footage aswell

http://farm3.static.flickr.com/2795/4041819003_9dea1947fe_o.jpg
http://farm4.static.flickr.com/3536/4041819401_114aff7ac0_o.jpg
http://www.ae86drivingclub.com.au/dcimages/1/2/0/7/26833.jpg

and my fav
http://www.ae86drivingclub.com.au/dcimages/1/2/0/7/26834.jpg

[corknose]

thanks heaps boss. i was gunna do that but cbf, yeh matt does great work would of been great if those people wernt all in that other one of his would of been mint as.

[Clinton]

lets go out? guys??

[corknose]

date.

[Clinton]

so are we going for skids?

[corknose]

tonight arnt u back in qld?

[Clinton]

nah man, tomorrow lunch time

[corknose]

i might be able to sneak out but no car for me.

[R&D Mechanical]

sick skid pic! looks real good man i like it alot

[Kid Karola]

Looks almost Ueo-ish in primer, no rear bumper and those Mk III's :wub:

[sundee]

EPIC WINNA the pic from the rear!! no rear bumper rocks hard, that pic is going in my screen saver

[corknose]

Haha just gotta make it desktop worthy now!!

[marvis]

So awesome!

[corknose]

have a lip I might put on aswell, now I just need more lock so hurry up matt get your t3 arms so I can make some.

[pen15]

get Joel on the cast i want em asap too before the weekend i need them bad

[corknose]

Haha get them before Thursday do I can have some as well!! Hurry up sundeeeeeeeeeee I want to copy matts and watch option.

[hao.]

So hot right now.

[sundee]

Haha get them before Thursday do I can have some as well!! Hurry up sundeeeeeeeeeee I want to copy matts and watch option.
your going to copy them?? whats the point their cheap as anyway!

by the time u stuff around measuring up and then throwing all the info in a CAD program then buying the steel and taking it to get cut up...

i can sell u a set cheaper then that!

[corknose]

I get free material I work on cnc and I have no money. I can make them for about 20 bucks as a set

[RRX-007]

looks fuckin sick now. makes me wanna sell the wagon and get a sedan.

[corknose]

hey joel how much to buy a set?

[sundee]

i forgot to say and u have electro plating aswell after u get them made..
ill pm u.

[benzo]

Looks much better now Call

needs wider front wheels, 8.5s, then it'll be sweet

[corknose]

Nah going to get bigger lca so I have more track.

[benzo]

Cool. Looks much better now its lower also

[corknose]

so didnt wanna do any real work at work atm (fuck cleaning out 8yr old coolant out of a machine its dirty as fuck!) so i made a boss kit for wheel i had lying around.
http://www.ae86drivingclub.com.au/dcimages/8/6/6/27399.jpg

and i also got bored at home today so i made this badboy. probs get annoying and get rid of it but its cool for now.
http://www.ae86drivingclub.com.au/dcimages/8/6/6/27400.jpg

and i also have a madhouse lip here didnt look any good before and fitted it up today looks mint so ill put it back on soon along with my rear bumper.

[corknose]

going to paint properly with a gun so any ideas on colours trying to hide from the 5-0 also.

[bams_keto]

don't be gay!

Leave it coz if u hit sometime u can fix it up for $3 bucks(spray can)!

[corknose]

but the 5-0 is getting a bit hot around here these days

[45KIDS]

Go black. I wanna see a hot black ke!

[ae86]

olive green n respray front centres silver or jump off failcliff.

[corknose]

or black with black rims?

[ae86]

meh overdone like my pansy paintjob

[corknose]

im thinking of going like a black/purple with some gold centers like a pimp.

[corknose]

soo took it to the skid pan and had a ball first time ever i think i went ok, found out im sitting on bumpstop on the rear and i need to get my handbreak working but i found other ways the initate drifts so thats all good cant wait for the next one this is the only pic i have so far,

http://www.ae86drivingclub.com.au/dcimages/8/6/6/27960.jpg

[pen15]

looking good I'll get more pics up asap LOL I'm lazy

[lolwat]

this thing looks awesome (from the pics on PG8 i just realized your car is my background:P)
you haven't got any bigger res one do you??

looks awesome

[pen15]

http://www.ae86drivingclub.com.au/dcimages/4/2/8/547861.jpg

http://www.ae86drivingclub.com.au/dcimages/4/2/8/27989.jpg

http://www.ae86drivingclub.com.au/dcimages/4/2/8/27990.jpg

http://img338.imageshack.us/img338/9207/p1030182.jpg

http://www.ae86drivingclub.com.au/dcimages/4/2/8/27992.jpg

http://www.ae86drivingclub.com.au/dcimages/4/2/8/27993.jpg

just pics of sliding


but for you KE slider i got this
(but if you need it bigger i can do it for you)
http://img193.imageshack.us/img193/7806/p1030296yf.jpg

[corknose]

YOU FAIL MATT, just put them in onee folder on photobucket and post the linkage.

[sundee]

Photo bucket rules! cal i love your car man! can wait to see it in person. so cut i couldnt come for a skidd

[corknose]

thanks heaps matt/lisa for the pics food helping out in genral with my handbreak and giving me tip.

[pen15]

my name is mat with 1 t and i cbf putting up all the pics most of them are epic fail lol these where the crem de la cram

[corknose]

haha ok mat, sorry.
got a parts list going seems as im bored as fuck,

Project mu pads.
RDA 7501s slotted rear disks.
Bride Zeta 3.
Ae70/te71 rails or 86 depends what i find.
Adjustable lca's.
Velo 4 point harness
Buddyparts Half cage with harness bar.
then get it all engineered so popo cant rape me as hard,

[Golberg]

haha ok mat, sorry.
got a parts list going seems as im bored as fuck,

Project mu pads.
RDA 7501s slotted rear disks.
Bride Zeta 3.
Ae70/te71 rails or 86 depends what i find.
Adjustable lca's.
Velo 4 point harness
Buddyparts Half cage with harness bar.
then get it all engineered so popo cant rape me as hard,

I'm going to rain on your parade slightly here. You cannot engineer a Bride as they are not ADR compliant.

That doesn't of course mean that they don't pass ADR's just they haven't been tested to comply. Which is really quite shit, because they're the best seat out there.

Never the less, keep up the good work.

[corknose]

hahaha yeh i know that, but i mean everything else, i think sparco cant be engineered either. anyone know the laws about the half cage in regestered vehicle thing in nsw?

[Golberg]

I do believe they are engineerable, but you must remove the rear seats and deem the car to only be a 2 seater from then on.

[pen15]

dood the bloke that cork will be using for the report will pass brides so dw bout that lol and cork im sending you a link i found tell me what you think

[sundee]

regarding cage, u can have a half cage, u need to remove the rear seats and rear seatbelts, and i think the main hoop has to be padded.

[corknose]

yeh swee as im just trying to be able to use this car for everyday and track without getting raped "too" much.

[R&D Mechanical]

looking tops mate :D

[lolwat]

yea man if you can get one that is around 1680x1050 would be SWEET and if you have one of the rear too i love this thing(the way i want mine when i get one:D)

[Joshie_Mcslide]

awesome!

Love your work!

[corknose]

thanks for all the comments guys, really keen to do some more skidpans and maybe a track day im not sure if im ready for the track yet but we will see.

[Joshie_Mcslide]

Victoria Sux balls!!

got a light car club in ballarat though,thinking about joining for the 2 sprints they hold a year....otherwise they use a shithouse dirt track!
probably not worth it........gotta hit up empty car parks n shit! haha
Have you got traction brackets in this? I've got an almost new pair of AJPS ones for sale

[hao.]

Car looks real good! Good work.

[corknose]

Thanks guys , what do these so called traction brakets do?

[Jdm-Mcc]

Sure is dirty, i like it

[Joshie_Mcslide]

increase predictability of a slide....I only really used em in the rain with a 4k,lol
but you could feel the difference!

[sundee]

Sam Q has a good page u can have a read of cal... read the section on 4 links and u will get the idea.. its in referance to the angle of the lower arms...

http://s-86.com/articles.html

[Joshie_Mcslide]

If anyone can Explain it Sam's ya man!

He made his own!

[OMG866]

thats a good link to alot of questions ppl need answers to ( sundee )

[corknose]

cork specials should be started tomorrow.

[sundee]

thats a good link to alot of questions ppl need answers to ( sundee )

yeah sam's the man... its a good write up

[Joshie_Mcslide]

yeah sam's the man... its a good write up

WORD HOMIE!!

nah Sams an absolute Gun of a bloke! It's pretty evedent from his site,but he's really out to help with whatever he can!

Josh

[OMG866]

Whats the next part you goin to buy/install to this rig?

[corknose]

ps arms, adj lca. atm

[sundee]

not going into mass production are u cal

hey dude can u throw some more pic up of your car.. wanna see some moaaaarrr

[corknose]

Maybe ;) just see what happens, going to change design a but but way over engineered.

[luke641]

Ay Cal...

Just found these pics of your car when it was being built.. Dont no if you have seen them so though ill post them up...

http://www.ae86drivingclub.com.au/dcimages/2/0/0/2/29059.jpg
http://www.ae86drivingclub.com.au/dcimages/2/0/0/2/29060.jpg
http://www.ae86drivingclub.com.au/dcimages/2/0/0/2/29061.jpg
http://www.ae86drivingclub.com.au/dcimages/2/0/0/2/29062.jpg
http://www.ae86drivingclub.com.au/dcimages/2/0/0/2/29063.jpg
http://www.ae86drivingclub.com.au/dcimages/2/0/0/2/29064.jpg

[corknose]

yeh seen and got them.

[corknose]

http://www.ae86drivingclub.com.au/dcimages/8/6/6/547949.jpg

new pads and disk mmmmmm.

http://www.ae86drivingclub.com.au/dcimages/8/6/6/29337.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/29338.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/29339.jpg
http://www.ae86drivingclub.com.au/dcimages/8/6/6/29340.jpg,

[sundee]

something tells me u need to get rid of that dirty press bend over diff exhaust system... car looks tuff cal

[corknose]

hahaha i saw it and im like nah no1 will see it, yeh i know my diff sitts on it now so needs to go.