PDA

View Full Version : Bigport distributors


nebuchernezzer
24th January 2006, 08:38 AM
Okies, we have a bigport AE82 motor in our hachi, the dizzy is the original unit with the plugs facing upward (ie out the side of the dizzy), it's a Nippon Denso unit i think however when we go to the shop to buy a new dizzy cap (it's broken http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif) we are presented with a bosch unit that doesn't fit. Is the bosch unit the right part for another 4AGE or have we been given the wrong bit?
ae71neo
24th January 2006, 10:09 AM
I'll go have a look at the one i have in the shed.
ae71neo
24th January 2006, 01:40 PM
The one i have is a Denso. Mines for sale to http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
mattysshop
24th January 2006, 02:11 PM
you have been sold a 100kw dizzy cap.. it will fit, but only 1 of the hole line up.. chose which one you want to line up, and double check your timing, it might run a but retarded, or mega advanced.. it won't hurt it just having 1 on there..

i have done the same thing.. it was the last thing that i needed to drive my car, so i just chucked it on and forgot about taking it back.. i think the have the listings the other way round.. 88kw cap is actually the 100kw cap and vice versa.. having the leads not come out the top doesn't matter at all, as long as the leads reach you'll be fine..
mattysshop
24th January 2006, 02:11 PM
Selling the dizzy?
if so how much and does it join the loom with a yellow cylindrical plug?
ae71neo
24th January 2006, 02:48 PM
It looks like this..

$35?
nebuchernezzer
24th January 2006, 10:03 PM
Sorry we are after one with a yellow cylindrical plug on it not that black square one, not sure what the difference is but thats the one that plugs into our loom so might as well get it.
andru_g
24th January 2006, 10:09 PM
yea what matty said... u need the dizzy cap outta the 4age in the ae82 there different part numba in both champion and bosch
ae71neo
24th January 2006, 10:31 PM
no worries http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
roadsailing
27th January 2006, 06:50 PM
ae71neo, that looks like a smallport dizzy.

nebechenezer, i bought a cap for mine a while ago, it didn't fit at all. i got one from repco in the end, get them to look up the parts for all the usual suspect corollas and take your cap or dizzy in to compare.
nebuchernezzer
28th January 2006, 02:59 PM
I got one now so all is cool http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
Just got to wire the rest of the AE82/86 looms into the hachi now though, anyone got a clue about this?
Toyota wiring diagrams are the suck compared to Nissan.
roadsailing
28th January 2006, 04:23 PM
there is virtually no "splicing" of looms to do at all really, just think of it as an engine going into a car with a loom and ECU.

the ECU needs a start signal, give it one. the ECU needs to tell the fuel pump to turn on, wire it up. the ECU needs a constant battery feed - give it one etc etc.
mattysshop
29th January 2006, 11:11 AM
thats all well and good, but you might end up with a couple of KG's of wire and plugs left over.. http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif but it will work though