PDA

View Full Version : Piston tops



rxbenny
16th April 2006, 03:39 PM
I have an AE92 short block and i was wondering if i was to use a wire brush to clean off the carbon on the top of the pistons would it make the piston weaker/fail earlier.

omy
16th April 2006, 09:37 PM
Noooo wire brush, used carb cleaner and a cloth.

upgarage
16th April 2006, 10:19 PM
or kerosene/petrol and cloth

Mad RS
17th April 2006, 06:23 PM
Definately don't use a wire brush. With a few decent scratches you will create hot spots and they lead to premature failure. A good soak in petrol and carbi cleaner will do the job.

riceburner
17th April 2006, 07:48 PM
Or a quick spray of brake fluid/carby cleaner and sum very soft steel wool.

Done it before, never had trouble with it.

Cheers

Steve

mattysshop
18th April 2006, 08:53 AM
letting them soak overnight in water despersant (wd40, inox) etc etc.. will make the job alot easier..